Month: August 2021

Whether a Modern Farmhouse design or creating accents on a gable, board-and-batten is one of the hottest trends in home exterior design. And it’s easy to create the board-and-batten look using just TruExterior Trim. Not only does TruExterior’s poly-ash formula deliver the ideal combination of authentic looks and high performance, TruExterior installs with ease and can be painted any color.

Here’s how to create the coveted board-and-batten look using TruExterior Trim:

• Due to the vertical installation, be sure to use a drainable housewrap between the siding and the wood sheathing to ensure moisture has a pathway to escape the wall cavity.

• Choose 1X, 5/8”, or 5/4” trim thickness. Which one is simply a preference for the homeowner and installer

• For a traditional board-and-batten look, use 1×12 trimboard as the board and 1×3 trimboard as the batten.

• Find center on the wall and plan your layout to determine if it’s best to start with a batten or a board at that center point; you want to avoid having only a sliver of board when you reach the outer edges.

• Once you’ve chosen center board or center batten, start by installing a board first. If it’s a center board, mark the center of the wall, line up the board, and put it in place using 6D or 8D stainless steel or hot-dipped ring shank nails every 16” (and no less than 3/4” from the board edge) directly into the plywood or OSB.

• Install boards, moving away from center, leaving 3/4” of space between each board.

• After several boards are in place, chalk a single line 7/8” from the edge of the board left or right, which will designate the edge for the batten. This results in a 9-1/2” reveal between each batten.

• Apply a bead of caulk along each side of the batten or under each side of the batten.

• Install the battens using 6D or 8D stainless steel or hot-dipped nails every 16”.

• Repeat the process, moving outward from center.

Keep in mind that paying attention to your layout, and planning it out ahead of time, is important, particularly for small areas like gables. You want the surface to be as symmetrical as possible; if you have uneven board reveals on either side, it will be very noticeable, particularly on smaller surface areas.

Learn more about TruExterior Trim and how to create custom looks here.

The supply challenges that continue to impact certain building materials dealt another blow to architects and building pros in the Pacific Northwest and Mountain region with the recent announcement that a major fiber cement manufacturer will no longer be selling trim there. But those drawn to the performance and appearance of fiber cement need not worry—TruExterior Trim from Boral Building Products is readily available, offers a similar aesthetic, and provides a number of performance improvements over fiber cement trim.

Making the switch to TruExterior Trim is easy and can ensure your exterior projects don’t experience delays or require significant design changes.

Moisture Resistance

TruExterior trim is made with poly-ash, a proprietary blend of fly ash and polymers. The resulting material offers high resistance to moisture absorption, a tremendous benefit in the notoriously damp Pacific Northwest region. These same attributes allow TruExterior to be used in contact with the ground and masonry, something fiber cement cannot do, and there’s no need to prime end cuts in the field.

Like fiber cement trim, TruExterior is resistant to rot and termites.

Authentic Looks

Architects can make the switch from fiber cement trim to TruExterior without changing their design goals. The poly-ash material offers the look of wood, with options for a smooth or wood-grain surface. Minimal material movement allows for tighter gaps for a more seamless appearance.

With a high level of dimensional stability, TruExterior Trim can be painted any color, including dark hues such as black, popular for trim, or the blues and grays common in the Northwest. Paint lasts longer than it does on wood because TruExterior cycles virtually no moisture.

Superior Workability

TruExterior requires no custom tools for cutting, and the poly-ash trim can be milled similarly to wood to achieve nearly any look or custom design. (See the trim at work at DURATION MOULDING & MILLWORK.) But unlike wood, installers can fasten TruExterior close to the edge, do not have to worry about mushrooming, and do not need to pre-drill.

“Fiber cement is well-known to many specifiers and installers; however, once they work with TruExterior, they soon realize how easy it is to work with and the benefits of utilizing standard woodworking tools,” says Ben Drury, Brand Manager for Boral Building Products. “Not having to worry about moisture absorption in the boards is also a key component.  You can place this product right at grade or on top of existing masonry and not experience any wicking or degradation of the board over time.”

Whether you’re in the Pacific Northwest or anywhere else in the country, get to know TruExterior Trim on our website and by finding a dealer near you.