Versetta Stone™ panelized stone siding combines the timeless look of stone with an easy-to-install format suitable for pros and DIYers alike. It also can be supplied at traditional lumberyards with your other exterior materials.
Much like a traditional siding panel, Versetta Stone features an integrated nailing flange through which it is fastened to the wall—no mortar, scratch coat, or metal lath required. Each lightweight panel covers 2 square feet and features a built-in rainscreen.
Full instructions should always be followed and can be found here. In addition, here are a few best practices and key steps to keep in mind to ensure Versetta Stone looks and performs at its best:
• Plan ahead: Versetta Stone’s Ledgestone and Tight-Cut profiles are made from 20 different master molds that can be flipped, allowing for 80 square feet of wall coverage without visual repetition. Still, it’s important to plan your layout ahead of time to avoid repetition and visible seams. Ensure your seams will stair step by staggering each course a minimum of 8”. Versetta’s Universal Corners ensure corner intersections also have a finished appearance; follow the installation instructions for a staggered left-right installation to achieve an authentic look.
A recent Versetta Stone installation demonstrates a stair-step approach to stagger seams.
• Mark studs ahead of time and be sure to hit two studs per panel.
• Consider black housewrap or felt paper when to help further disguise seams.
• Keep it level: Just like any siding installation, verify your courses are level often.
• Brush away dust: When cutting, debris can sometimes land in the panel grooves. Be sure to brush it out to ensure the tongue-and-groove panels nest together properly and your courses stay level.
• Drive fasteners straight and flush when installing stone siding to ensure proper performance.
• Create smooth transitions: When installing stone siding half-walls for a multi-textured facade, Versetta Stone’s wainscot cap/sill can create an ideal finish and transition from the stone to the cladding above. The wainscot includes the same nailing fin as the siding for easy installation. Install flashing over the nailing fin and then shingle the other cladding over top to ensure water sheds off of the sill. Leave a small gap between the cladding and the stone, per each cladding’s installation instructions.
• Adjust for continuous insulation: If installing Versetta Stone over foam insulation boards, it’s best practice to install an additional layer of sheathing on top of the foam tied back to the studs. You will need to use longer fasteners to accommodate the additional two layers. Consult this Technical Evaluation Report for fastener requirements.
Westlake Royal Building Products™ now offers Westlake Royal PROS Perks™, a contractor loyalty program for new and existing customers. PROS Perks is a point-based program that will award customers with merchant gift cards and Visa® Reward Cards as a thank-you for purchasing products within the robust selection of Westlake Royal Building Products brands.
PROS Perks rewards are easy to redeem and use—customers simply log in, add purchased products, and submit photos of their invoices to the PROS Perks website (www.wrproperks.com). Points are awarded based on dollar amount spent, will accumulate, and can be redeemed for gift cards.
“Contractor programs are not new, but are often cumbersome for the user, with complicated points systems, rebates solely for more materials, or merchandise-only rewards. The new Westlake Royal PROS Perks program is hassle-free and delivers rewards to spend however they wish,” said Steve Booz, Vice President of Marketing & Product Management for Westlake Royal Building Products. “We value our customers and want to ensure they not only receive beautiful, high-performance exterior and interior products, but can cash in on their loyalty to our portfolio of brands.”
PROS Perks will include products within 13 of Westlake Royal Building Products’ brands: Royal® Siding, Exterior Portfolio® Siding, Portsmouth™ Shake & Shingles, Foundry Specialty Siding®, Cedar Renditions™ Aluminum Siding, Celect® Cellular Composite Siding, TruExterior® Siding & Trim, Versetta Stone®, Royal® Trim & Mouldings, Kleer®, Mid-America® Components, Royal® Shutters, Mounts & Vents, and Zuri® Premium Decking. Additional points incentives will be added throughout the year, making this Westlake Royal Building Products’ most robust reward program to date.
Each year in late summer and fall, major paint companies release their “Colors of the Year” for the following year. These hues represent how each company’s in-house experts interpret the consumer pulse—our emotions, design motivations, influences, and more—and how color selection influences our lives and lifestyles.
While the color reveals are interesting in and of themselves, they provide our industry with a view into the hearts of our customers and a look at how their color choices may shift, or need to be shifted, in the process of navigating the latest trends and tastes.
Not surprisingly, the pandemic has had a tremendous influence on the color trends of the past few years, with many choices seeming to focus on relaxation and tranquility, or perhaps a little brighter for a feeling of positivity and optimism. This year’s selections continued to feel that global impact, but with varied interpretations of how consumers will feel going forward. Of the four colors shown below, two are bold and two are soothing. And perhaps both approaches are appropriate today, as Americans continue to navigate a post-pandemic norm in very different ways.
Here’s a look at a few of the Colors of the Year for 2023.
Benjamin Moore: Raspberry Blush
Benjamin Moore made a big move this year, shifting from 2022’s subtle October Mist, a silver green, to 2023’s vibrant Raspberry Blush. “A vivacious shade of coral tinged with pink, Raspberry Blush enlivens the senses with an electric optimism,” the manufacturer says. The “charismatic,” “unapologetic” shade is saturated and impactful, designed to be bold and make a statement.
Photo courtesy Benjamin Moore
The remainder of Benjamin Moore’s Color Trends 2023 palette, including Conch Shell (a dusty but rich pink), Savannah Green (a rich ochre with balanced green and yellow undertones), and North Sea Green (a deep teal with gray undertones) “was chosen for its distinct presence and personality,” the company says. “Each of these eight confident hues offer inspiration and creativity, while encouraging a push beyond the traditional to experience truly exceptional color.”
Sherwin-Williams: Redend Point
In contrast to Benjamin Moore’s bold color, Sherwin-Williams’ 2023 Color of the Year leads with “warmth and intrigue.” Redend Point, an earthy brownish-pink reminiscent of clay earth and walls of the desert west, is described as “soulful yet subtle.” And while a more calming hue, the company says it represents moving forward and looking ahead, connection and care.
Photo courtesy Sherwin-Williams
Behr: Blank Canvas
Behr’s 2023 Color of the Year is Blank Canvas, a “hopeful, warm, and welcoming white” the company says will answer homeowners’ need to create retreat-like spaces that feel restorative. At the same time, the company says the color is designed to be versatile. “The color works in both private and shared spaces and can work as a focal color or a foundation to build on for more layered spaces,” Behr says.
Photo courtesy Behr
Research showed that the hue would be in demand in 2023: “According to a survey of more than 1,000 U.S. homeowners, 63% of people agree that the color white is mood-boosting, and 77% say it makes them feel positive,” Behr reports. “Homeowners also say they want their home to be a space where they can unwind and destress, according to the survey, needs warm whites like Blank Canvas can help fulfill.”
PPG: Vining Ivy
PPG joined Benjamin Moore with a saturated statement hue, Vining Ivy, a deep Caribbean aqua, as its 2023 Color of the Year. The manufacturer says the color is classic and elegant, and it works with a variety of styles.
Photo courtesy PPG
“Resilience, the need for connection, and inspiration from nature were recurring themes at the Global Color Workshop,” PPG says. “This annual event brings together more than 30 global color stylists from the automotive, consumer electronics, aerospace, and home paint and stain industries. Over the course of several days, the stylists analyze the runway, lifestyles, demographics, geographies, global events, and cross-cultural societal inspirations to determine what colors will resonate and represent that year, including the 2023 Color of the Year.”
Along with predictions from paint manufacturers, the design community highly anticipates the annual announcement of Pantone’s Color of the Year, which is due out in early December. What will follow the color expert’s hopeful yellow-gray duo in 2021 and this year’s creativity-inducing Veri Peri (a dark lavender)? Stay tuned.
It’s the combination every homeowner craves: The beautiful look of stained cedar without the hassles or maintenance. Cedar Renditions™ siding delivers these attributes and then some to the benefit of consumers, builders, and architects alike.
The modern-looking, high-end siding comes in a variety of woodgrain colors with a robust, fade-resistant PVDF top coat. Along with three traditional hues, the siding comes in four premium colors boasting multiple tonalities for an even deeper woodgrain look. Unlike some competing materials, the panels’ unique overlap helps achieve longer lengths for a seamless appearance. This along with the flat face panel and clean horizontal joints help create a truly contemporary look.
Cedar Renditions is available in 6-inch siding ideal for accents alongside stone, stucco, and brick, and in a complementary soffit for the perfect finishing touch. A wide range of matching accessories and trim coil further enhance the project.
Moisture-proof and rust-resistant, Cedar Renditions is suitable for any market, but is especially desirable in coastal areas including Seattle, Chicago, and New England. The siding is impervious to cold, insect-proof, is non-flammable, and withstands winds up to 200 mph. It’s also 100% recyclable.
For contractors, Cedar Renditions offers simple, straightforward installation similar to other panel-style claddings. Corner posts and J-channels provide starting points, then panels install easily with a drop-in interlock system. Available graphic guides help ensure pattern randomness for a truly authentic look.
Cedar Renditions carries a 25-year pro-rated limited warranty.
Nestled on a peninsula in the protected waterways of North Carolina’s east coast, the River Dunes master-planned resort community exudes the relaxing ambience of outdoor-oriented living, maritime roots and timeless architecture. So it’s only fitting that the concept of this year’s Southern Living Idea House, recently completed across from the community’s marina, is “The Great Escape.” With a waterfront locale, cozy coastal vibe and ample outdoor space, there’s no question the show home lives up to its name.
With that theme in mind, architect William Court, of Bluffton, S.C.-based Court Atkins Group, designed the home as a getaway—both visually and functionally—for homeowners and guests alike.
Flexible space and multiple structures allow for up to five bedrooms without the main house feeling too large or inefficient. Along with a primary suite and two traditional guest suites, there is a carriage house with a garage and bonus space above that serves dual purpose as an office and a guest bedroom with an en suite bathroom. A third structure functions as an art studio but converts into an additional guest suite when needed.
“The home will work as a getaway property or as a permanent home where extended family can gather,” Court says. “The design allows you to open up spaces as needed for different tasks or when people show up.”
Furthering the home’s effortless accommodations is an abundance of porch space wrapping the main house, including a large two-story porch for the entry and primary bedroom suite as well as an adjacent dining porch. “That gave us extended gathering space,” Court explains. “What you’re creating is not oversize rooms, but pockets of space where people can congregate comfortably.”
The design team used Zuri® Premium Decking on all of the porches and the rear terrace, selecting the Chestnut hue for its natural look and fresh, warm feel.
Along with its exotic wood aesthetics, Zuri composite decking offers scratch and stain resistance, requires little maintenance and comes with a 25-year Colorfastness Warranty, ideal features for a coastal environment prone to high humidity and ample amounts of both intense rain and intense sun. “When maintenance will be an ongoing issue, we want to limit that as much as we can, and Zuri fulfills that need,” says Court.
The architect intentionally kept the porch floors simple, forgoing decorative inlays and patterns while leaving the nosing exposed. “We wanted everything outdoors to feel warm and have some thickness and heft.”
To create a seamless transition from indoors to out, the Idea House features large sliding and French doors with transoms above to let in plenty of daylight. The interior wood flooring is similar in tone to the Chestnut Zuri decking.
Because the home is on a heavily foot-trafficked corner of the walkable community, privacy was top of mind when designing some of the outdoor spaces. Most notable is a rear courtyard created by the three structures; a brick wall, gate and trellis fill in the gaps to create a zone almost entirely invisible from neighboring properties. On the exposed dining porch, a panel of interweaving squares shields guests while adding an extra decorative touch.
Indeed, the River Dunes community is known for its timeless architectural detail, and the Southern Living Idea house upholds that tradition. The home deftly blends two prominent local styles—historic Lowcountry and nautical. “Our challenge was to capture both of those but also make it current and relevant,” Court says. “Our details are proportionally in keeping with the Lowcountry vernacular—two-story porches, overhangs, exposed rafter tails. But we’ve made them current with a cleaner, streamlined feel.” This includes opting for flush shiplap with mitered corners instead of a more traditional lap siding, overscaled windows and roof overhangs, and simplified brackets.
The result is a home that combines the best of Southern, coastal living in both form and function. The architectural stylings will endure for years to come, while the thoughtful and purposeful design encourages a relaxing lifestyle alongside impeccable hospitality.
Read more about this year’s Southern Living Idea House here.
As labor challenges abound and schedules remain tight, trimming inefficiencies out of your installation processes can add up to critical time and money savings. Every contractor has their tricks for eliminating wasted steps without sacrificing a quality install. Here are a few best practices to work efficiently.
1. When installing vinyl siding, be sure to leverage available accessories that can reduce detail work while ensuring a finished look. These include: • Dual undersill trim: This is used the same way as standard finish trim, such as under windows or at the top of the wall, but because it has two slots instead of one, there’s no guesswork as to whether you need to bump out the finish trim to keep the siding angles correct.
• Board and Batten Trim: Use this to separate the courses of vertical siding since the profiles can’t overlap at the seam. The Board and Batten Trim has built-in flashing, making installation easy as well as functional.
• Shake Finish Trim: Designed for Westlake Royal Building Products’ Portsmouth Shake Panel, Shake Finish Trim secures ripped panels under windows and doors or at the top of a wall. Use a snap-lock tool to create snap lugs about every 6” to 8”, then snap the panel into the Shake Finish Trim and lock the snap lugs into place securely.
2. If you have a damaged vinyl corner, you can replace it without removing any siding. Cut and remove the existing face, leaving the channels. Cut and remove the face of the new corner, leaving the return. Then snap the new corner over the channel of the old.
3. When installing CraneBoard® Solid Core Siding® insulated vinyl siding, keep the ends of the foam no more than ¼” from each other to retain the insulation value, while giving the panels enough room to expand and contract. Pull and use your measurements from the foam instead of the panel. Both the panel and the foam will be the correct length.
4. For deck stairs, Fulton Fine Woodworks created a wooden jig that fits between the deck boards and shows precisely where to pre-drill for screw placement, eliminating the need to measure. See it here.
6. Tim Uhler, lead carpenter at Pioneer Builders, often creates makeshift tools that can do tasks more quickly while reducing user strain and fatigue. For example, instead of bending to cut sheathing while framing walls on the ground, he mounted a floor scraper to a router with spiral bit: https://www.instagram.com/reel/CcuBh83gBzS/?utm_source=ig_web_copy_link
Shutters are an ideal finishing touch for most home exteriors. And with countless options across price points, styles, and colors, it’s easy for pros and consumers alike to find the perfect fit for each home. But that extensive selection also can become overwhelming, especially for homeowners. Dealers selling shutters can play a key role in helping customers narrow down their options and secure the best match.
Consider these sales strategies to support pros and DIYers:
• Don’t start with price: The best way to begin the selection conversation is determining the customer’s functional and aesthetic needs. What are the most important attributes they’re looking for? Low maintenance? Do they favor a wood look? What design style are they seeking? Do they want operable or fixed units? These initial discussions will help point you and the customer toward a category and profile first.
Not only will this help customers find a product they like, it also can help you avoid providing price quotes for each and every feature. Determine what they want, then discuss pricing options.
• Ramp up your knowledge: Between the number of options and the requirements for proper sizing, it’s critical that retailers selling shutters understand the nuances of materials, styles, and specifications. (See some of the mistakes your customers might make here.) Leverage your Westlake Royal Building Products’ sales reps—they’re your resource for training and questions. They also may be able to accompany you on the jobsite, present to the customer, and provide measuring and installation support.
• Create displays: For homeowners, seeing and touching product options can help them realize the impact of adding shutters as well as decide between materials. If space allows, create a working façade showing a few of the most popular profiles. Work with your manufacturer to get hand samples of the options you offer, not only of the shutters themselves, but also the hardware.
• Leverage color guides and design tools: Consult color guides available from Atlantic Premium Shutters and Mid-America components. In addition, dealers and their customers can use online design tools such as the Virtual Remodeler to see which shutter styles and colors will look best on their home and in combination with their siding, windows, roofing, and trim.
• Ask customers to bring photos and examples: Choosing the right shutter style for the home can be confusing to buyers. Encourage them to bring a photo of their home so you can help determine which profiles will be best suited to the façade. In addition, they can bring Pinterest examples and other inspiration to guide the aesthetic conversation.
• Relay the process: Homeowners may not understand the extended lead times required for custom colors and that shutters are often the last thing to be installed on the home’s exterior. Make sure to manage expectations by discussing the true delivery timeline.
Together with Habitat for Humanity – MidOhio, Westlake Royal Building Products recently celebrated a historic milestone with the dedication of the 300th home to feature the company’s donated siding and trim materials in the Ohio region. On Thursday, Sept. 15, the three-bedroom, two-bath single family home was dedicated and keys were turned over to the partner family in the South Linden neighborhood of Columbus.
The dedication of this house marks the 300th siding donation that Westlake Royal has made to Habitat for Humanity – MidOhio over the last 20 years. For this home, Westlake Royal donated 20 squares of siding, including Exterior Portfolio® Vinyl Siding and Portsmouth™ Shake & Shingles Siding, as well as Royal® Shutters, Mounts and Vents accessories. Westlake Royal’s Columbus-based employees also donated their time and skills to help with installing the building products during the construction of the home this summer.
“Amid inflation and rising costs, the need for affordable housing today is greater than it’s ever been. Westlake Royal is proud to be part of the solution in donating building products for good quality, single-family homes,” said Steve Booz, VP of Marketing & Product Management, Westlake Royal Building Products. “Our partnership with Habitat MidOhio dates back through several company name changes and decades, but our commitment to this organization and the community of Columbus remains unchanged.”
“When we invest in housing, we invest in the future of the entire community. Thanks to the contributions of Westlake Royal, Habitat MidOhio has brought the dream of homeownership to 300 families,” said E.J. Thomas, President and CEO, Habitat MidOhio. “We are grateful for the generous support of our donors and volunteers, and look forward to continuing our work of providing quality, affordable housing to our family partners.”
In January 2021, Habitat MidOhio celebrated the dedication of its 1,000th home. The organization works to bring people together to inspire hope, build homes, empower families, and develop communities. For the past 35 years, Habitat MidOhio has served families through new home builds/rehabs (437), owner-occupied home repairs (350), and tithe support to its sister affiliates in Africa (331).
The wall system is one of the most critical areas for preserving the home’s durability and longevity. And it’s just that—a system. Each part of the wall, from the cladding to the housewrap to the flashing, plays a role in keeping the wall system protected and dry. As such, it’s important to note that different types of siding may require different drainage systems behind them and, therefore, work best with specific types of weather resistant barriers (WRBs).
Cladding Material Influences Housewrap Selection
At minimum, one of the first steps in ensuring your wall works as a system is to follow local code requirements as well as instructions from your housewrap manufacturer and guidelines from your siding manufacturer for the specific cladding or claddings. The siding’s material and how it installs on the wall both factor into the decision of what WRB to choose.
For example, a wood or wood-based siding is much more prone to moisture absorption and will require a robust rainscreen system to ensure bulk water drains away quickly instead of absorbing into the siding, which can lead to premature failure. TruExterior® poly-ash siding, which is resistant to moisture but installs flat against the wall, is recommended to be paired with at minimum a drainable housewrap, which provides more drainage than a flat housewrap but less than a full rainscreen.
The Vinyl Siding Institute requires installing vinyl siding, such as that from Royal® Siding or Exterior Portfolio® with a weather resistive barrier. Because vinyl and polypropylene sidings are designed to allow the material underneath to breathe, they can be installed over a flat housewrap unless local codes require otherwise.
This home features Royal® Vinyl’s Woodland siding in Heritage Blue and Portsmouth® Shake & Shingle accents.
Some cladding types feature a rainscreen already built in, as is the case with Versetta Stone® panelized stone siding. Because of this, the minimum recommendation is one layer of #15 felt.
Pay Attention to Transitions
With the growing trend of multi-textured facades, you’ll need to accommodate each type of cladding. When installing two products together that have different recommendations for housewraps and rainscreens, you’ll need to either wrap the entire façade in the more robust system or plan the wall system accordingly so that the corresponding weather barrier is positioned under each cladding and properly transitions from material to material per guidelines from the WRB and cladding manufacturers.
Versetta Stone’s wainscot cap/sill creates an ideal transition between the Versetta Stone panelized stone half wall and the Foundry Grayne siding above. Install flashing over the wainscot cap’s nailing fin and then shingle the other cladding over top to ensure water sheds off of the sill. Leave a small gap between the cladding and the stone, per each cladding’s installation instructions.
Flash Well
Follow all recommendations for flashing, as well, as some materials may require or recommend more robust flashing at the seams to prevent bulk water intrusion. Your installation instructions may also provide guidelines for step flashing along roof and wall lines to ensure water drains away rather than becoming trapped in the wall system.
Consult With Experts
Siding materials will shed the bulk of the water before it can reach the underlying wall assembly, but their main job is to make the house look good. Work closely with your housewrap and flashing manufacturer to ensure the wall system can properly manage any liquid water that may end up behind the siding so that the wall structure stays dry. Designing and installing a proper wall system can help protect the structure and its occupants while safeguarding the longevity of the home.
Have questions about your siding installation and exterior wall system? Connect with us here.
The home exterior can say a lot about the occupants within while also making a first impression on guests (and potential buyers). Because of the impact curb appeal has on the amount prospective buyers are willing to spend on a home, it’s important for homeowners to look beyond simply choosing the right siding color and consider different siding materials and profiles, adding accents like stone veneer and researching other high-ROI exterior upgrades that can both increase beauty and deliver performance over time.
In fact, exterior remodeling projects top the list of projects that add the most resale value to homes. According to Remodeling’s 2022 Cost vs. Value Report, nine of the top 10 projects delivering the best return on investment were exterior renovations.
Consider these high-ROI exterior upgrades from the experts at Westlake Royal Building Products that can improve aesthetics and increase resale value for your customers.
Front Door
If replacing the front door isn’t necessary, adding a fresh coat of paint is a simple way to refresh the home’s exterior. You can take the “dated” door and make it modern again with a bold, on-trend color. Take it a step further by adding artistic house numbers, a new light fixture, or a door knocker in an unexpected shape for inexpensive pops of style.
Vinyl Siding
Updating the home’s exterior with vinyl siding yields a 67.2% return upon sale, according to the Cost vs. Value report. When considering new siding, look for high-quality, low-maintenance materials. Depending on location, insulated vinyl siding can add additional protection against the elements, as well as increased energy efficiency. While function is important, don’t be afraid to make bold choices with color, texture, different profiles, and contrasting trim to make a true statement.
For example, Westlake Royal Building Products offers a wide range of vinyl siding options in the latest shades, including five new on-trend colors recently added to its RoyalSiding and Exterior Portfolio lines. Inspired by colors found in nature, the gray, blue-gray, brown, and green tones reflect the latest trends in modern exterior home design. Both lines feature patented color protection technology to resist fading, which is especially important for darker shades.
Shutters
Adding or replacing shutters is another easy way to add a bit of flair and can be a key finishing touch in creating the perfect exterior. With the potential to play beautifully alongside windows and siding as well as with architectural style and the surrounding landscaping, it’s important to make thoughtful choices and install them properly to ensure they look and function as designed. (See installation mistakes to avoid here.)
Composite Decking
Another exterior remodeling project with a high ROI (62.1%), according to the report, is replacing your home’s existing wood deck with composite decking. An option like Zuri Premium Decking combines the natural beauty and warmth of exotic hardwood with the durability and low-maintenance requirements of PVC (cellular polyvinyl chloride), which resists stains, scratches, fading, and moisture, for a deck that will last for years with minimal upkeep.
Manufactured Stone Accent Wall
Manufactured stone veneer on the bottom third of a home’s front façade delivered the second-highest return in this year’s Remodeling Cost vs. Value Report, with 91.4% ROI. Versetta Stone panelized stone siding makes it easy to achieve this look—the mortarless format attaches to the wall using nails or screws, and each lightweight panel features a built-in rainscreen.
Column Wraps
Give the front porch an instant facelift by wrapping the existing columns with PVC wraps. This is an easy way to achieve a cleaner and more modern, updated look. Resistant to moisture, PVC column wraps prevent issues found in traditional wood columns, such as warping, rotting, and insect damage. Available in a variety of ready-to-install styles, they can also be painted to complement your home’s exterior color palette.
For building and design pros looking to maximize the sustainability of their homes, the Vinyl Siding Institute (VSI) has added another tool to help make greener product choices for the home exterior. VSI, of which Westlake Royal Building Products is a member, recently published three Environmental Product Declarations (EPDs) outlining the life cycle story of polymeric siding. The EPDs’ user-friendly package makes it easier to understand the sustainability specifications of vinyl siding.
The three EPDs—covering industry-averaged vinyl siding, insulated vinyl siding, and polypropylene siding—were developed in accordance with standards developed by the International Organization for Standardization (ISO). Each outlines the environmental impact of the product over the course of its life, including raw material extraction and transport, manufacturing, and waste generation. By offering data in a transparent and standardized way, EPDs allow product specifiers to make apples-to-apples comparisons between different products and material types. This helps provide transparency and authenticity in sustainability research.
However, these newest EPDs forgo the typical numbers-heavy report that can feel too complex and unapproachable. Instead, VSI says the marketing-style guides feature easy-to-read text and graphics, along with an organized chronology of features and benefits that make the data more accessible and understandable for both pros and their customers.
Each EPD includes:
• A summary of vinyl siding advantages
• Detailed measurements outlining the siding’s carbon footprint, from the efficient manufacturing process to end-of-life recyclability
• A look at vinyl siding’s recyclability
• An overview of vinyl siding’s 50+-year life span
• Material elements
• A list of green building programs offering credits for vinyl siding
• Accessible metrics outlining environmental data and life cycle
Though vinyl siding has sometimes been overlooked for green buildings in the past, data reveal that vinyl outperforms almost all other common cladding materials in total environmental impact. This includes in the areas of waste, toxic chemicals, overall environmental impact, recyclability, and longevity. (Read more about vinyl siding’s green attributes.)
Whether styled in classic colors that never fade from favor or featuring trendy pops of color, the exterior façade sets the tone—and critical first impression—for the home. With tastes changing at a near-constant rate, what’s the best way to choose exterior color combinations that meet today’s needs without feeling dated quickly? We checked in with Kate Smith, color expert and president of Sensational Color, to get the latest tips and tricks for exteriors.
What Colors Are on Trend?
As often happens with exterior trends, some familiar looks remain popular amid a few emerging options.
“We’re seeing so much interest in very dark paints, which is surprising,” Smith says, including black, deep gray, olive green, and blue gray, as well as colors with dark undertones, such as green-black.
Smith says that classic grays and other timeless neutrals continue to trend, along with bright white or off-white for the popular Modern Farmhouse look.
Material colors are coming into play, as well, she notes, with stained wood accents, such as beams, appearing on homes where they may not have in the past. Metal is popping up in similar ways, from steel beams to glass-and-metal contemporary-style garage doors.
And, of course, mixing materials, textures, and colors continues to be popular, offering homeowners the opportunity to differentiate their façade and add an extra touch of personality.
Best Practices for Combining Exterior Colors
Indeed, multi-color and -texture facades are a key trend right now, but pulling it off well isn’t always easy. Smith recommends starting with the fixed elements—the roof and any brick or stone materials—and ensuring they work together.
“When those harmonize, it’s harder to go wrong with siding and trim,” she says.
From there, select exterior colors that work well alongside them. For example, if the stone façade has a lot of grays or browns, choosing a paint or pre-finished siding color that coordinates will ensure a more cohesive look.
When considering neutrals, keep in mind that not all beiges and grays are the same. They likely have undertones, such as brown or even purple, that alter their look. When in doubt, look at the grout, which can clue you in to a coordinating neutral hue.
“Your house is telling you what color to paint it, you just have to listen,” Smith says.
Another thing to keep in mind is the role of light in the appearance of the home exterior. Color in the paint store will likely look very different—from washed out to more vibrant—in daylight. When narrowing down color selections, advise your customers to take samples to the project site to see how the colors look in the environment in which they will be used.
Avoiding Common Mistakes With Exterior Colors
Smith is quick to note that “there are no bad colors, just some unfortunate combinations.”
Here are a few ways to avoid an exterior façade that stands out for the wrong reasons:
• Don’t go too vibrant: Jewel tones and other vibrant colors are beautiful, but can be overwhelming in large amounts on the home’s exterior. Choose a toned-down or grayed-out version of the hue to avoid an over-the-top, dated look.
• Don’t go too bold: Similarly, a full façade of purple or chartreuse may stand out too much and even affect resale value. The entry door, shutters, and other accents are great spots for those bolder hues and personalized style expressions, adding that pop of color without feeling overwhelming.
• Don’t aim for the perfect match: It might be tempting to precisely match the siding color to the brick, stone, or roof. But it’s nearly impossible to do and can create an off-putting look. Even if perfectly matched, materials weather differently over time and likely won’t look the same for long. If similar colors are desired, go for a lighter or darker shade to create a blended look instead.
When in doubt, consider timeless combinations. These might include white siding with black trim and a red door or gray walls with a black slate roof. Neutral hues are always a safe bet, as well. “A great gray or a great beige will never go out of style,” Smith says. She notes that neutrals are particularly helpful for multi-textured facades, acting as a bridge between materials and helping draw attention to visual focal points like a stone bump-out or dramatic copper gutters. “If color blends well, it becomes the backdrop.”
Also, be sure to leverage Westlake Royal Building Products’ color tools, including:
• Virtual Remodeler, HomePlay, and Dream Designer online visualizers that allow you to preview different product and color combinations on an image of the home or a similar home.
Exterior shutters are one of the easiest ways to give the home the perfect finishing touch or to freshen up a dated, ho-hum façade. But good-looking shutters don’t just depend on choosing high-quality products. Style selection and installation techniques can play a key role in how the shutters appear—and whether they look authentic.
Even if the shutters will remain fixed, they need to appear as if they properly open and close; the eye can tell the difference even when the shutters are open. This is why shutter size is so important. When specifying a shutter size, don’t replicate the window exactly. We recommend allowing 1/4” on all sides so the shutters will “fit” into the window opening if they were closed.
To properly size the shutters, measure the width of the window opening to where the shutters would close, then deduct 3/4”, then repeat the measurement for the height and deduct 1/2”. This will give you 1/4” on all sides, enough to ensure the shutters close easily with a little left over to accommodate any mistakes.
Improper Shapes
Similarly, square exterior shutters won’t fit into arch-top window openings, so be sure to specify shutters in the same shape as the window. In addition, for round-top shutters, make sure the tops arch away from the window when open so that they would match the shape when closed.
Mismatched Rails
Some may prefer to center the shutters’ horizontal rail within the window. This technique is fine and a matter of preference, but to be historically accurate, you’ll want to measure the shutters so that the mid-rail drops slightly below the window’s meeting rail. In the past, homeowners would raise the window for ventilation but close the shutters, so positioning the mid-rail in this way ensured they could reach the latch or slide bolt to lock the shutters closed.
Misaligned Exterior Shutters
Prior to fully securing the shutters, close them to ensure they sit at an even height. If the window is slightly askew, the shutters may appear uneven. You may need to shim the shutters into the opening before mounting the pintles on the trimboard.
Upside-Down Louvers
A surprisingly common mistake is to hang shutters upside down, particularly louvered shutters. When the shutters are open, the louvers should slope down toward the wall, so that when closed, they would slope away from the window to shed rainwater.
Choosing Improper Hardware for Exterior Shutters
When selecting hardware, take both the shutter style and the home’s cladding into consideration. For example, brick exteriors will require you to attach shutter hardware to the brickmold to ensure the shutter can close fully. How the window sits also comes into play—most windows are recessed, but in some modern styles vinyl windows will protrude past the siding.
Hardware orientation matters, as well. For example, acorn-style holdbacks are designed to sit unseen behind the shutter to lock it in place, making these holdbacks an ideal option for tall shutters to help avoid rattling. S-style or rattail holdbacks go in front and should not be fastened too tightly to avoid marring the shutter finish.
If you have any doubts about hardware calculations and sizing, talk to an experienced dealer or your manufacturer’s representative for assistance.
Improper Pintle Placement
The pintle, where the shutter attaches to the house, is typically installed with the pintle pin facing upward to make it easy to set the shutters in place. However, this makes the shutters more prone to blowoff in a storm. Install one pintle pin upside down (either the bottom or the top if there are two, or the middle if there are three) to lock it in place and avoid blowoff.
Multi-textured facades are one of the most popular trends in home exteriors. And incorporating stone—on a half wall, on columns, or on bump outs and other architectural features—is one of the most common ways to create these varied looks.
Versetta Stone panelized stone siding makes adding these accents easy, combining the look of stone with mortar-free installation using just nails or screws. Each panel interlocks together, fastens through the nailing fin, and includes a built-in rainscreen.
Panelized Stone Installation Strategies for Cladding Transitions
Achieving a truly finished look when combining Versetta Stone with other materials to create coveted multi-textured facades is fairly simple, and the manufactured stone material is compatible with nearly all other claddings.
For stone half walls, adding Versetta Stone’s wainscot cap/sill creates the ideal finish and transition from the stone to the cladding above. The wainscot includes the same nailing fin as the siding for easy installation. Install flashing over the nailing fin and then shingle the other cladding over top to ensure water sheds off of the sill. Leave a small gap between the cladding and the stone, per each cladding’s installation instructions.
For side-to-side transitions, a simple J-channel or trim piece will ensure a finished look. As with the wainscot cap, be sure to flash at the transition point.
Plan Ahead for Multiple Cladding Materials
Aesthetically, Versetta Stone requires little planning—Ledgestone and Tight-Cut profiles are made from 20 different master molds that can be flipped, allowing for 80 square feet of wall coverage without visual repetition. With Universal Corners, corner intersections also are simplified; follow the installation instructions for a staggered left-right installation to achieve an authentic look.
One thing you do need to plan for with multi-textured facades are the weather-resistive barriers (WRBs) and flashings, as each cladding type has different requirements for housewrap and drainage. Versetta Stone, for example, has a built-in rainscreen to ensure the wall dries out, so it requires at minimum only a layer of #15 felt to maintain its warranty. TruExterior poly-ash siding requires a minimum of a drainable housewrap. So when installing the two products together, you’ll need to either wrap the entire façade in the more robust drainable housewrap or, to save money, plan the wall system accordingly so that the corresponding weather barrier is positioned under each cladding and properly transitions from material to material per guidelines from the WRB and cladding manufacturers.
With the cost of materials continuing to be volatile, you may be looking for ways to save money on the jobsite. On-site trim fabrication using a Tapco Tools brake and trim coil can not only provide those savings, but can also be a way to bring in extra money.
Tapco Tools offers a range of brakes suitable for everything from small remodeling shops to commercial projects, helping you achieve a high-quality finish no matter the size of the job. A full line of accessories provides even more versatility.
For example, the Brake Buddy allows you to elevate your on-site trim fabrication with more style and originality, including producing brickmold trim and decorative ribs in just seconds. Suitable for any Tapco Tools portable brake, the Brake Buddy features a measurement guide and quick-twist handle that provide for quick adjustments and simple, efficient operation.
Brake Buddy
For cutting, the Pro Cut Off for Tapco Tools Pro Series brakes provides factory-quality, single-pass cuts of heavy-duty sheet metal, eliminating the need for utility knives and shears. It features an easy-adjust mechanism for versatility and an ergonomic grip for smooth operation.
How Much Can a Brake Save in Material Costs
Crafting your own trim can save up to 36% of the cost of premade trim. Here’s a breakdown:
This spring, the cost of a 6” by 12’ aluminum cedar texture fascia trim from a big box store came to $14.98.
To craft that same fascia in a Tapco Tools brake and the Brake Buddy would cost $9.52 per piece. This includes a 24” by 50” trim coil at $119, which provides 12.5 6” fascia per roll. This results in a savings of $5.46 per piece vs. premade trim.
In addition, bending trim can take place off site and indoors, allowing contractors to work well past dark during winter months or to generate extra income.
Click here to find the right brake for your operation.
One of the biggest go-to trends in exteriors is board-and-batten siding. Due in part to the ongoing popularity of Modern Farmhouse styles, board-and-batten siding brings both charm and a modern edge, allowing some traditional designs to lean a bit more contemporary and fresh.
It’s also versatile: Apply board and batten to the full façade for a true Modern Farmhouse take, or use as an accent on a gable or bump out to add texture and dimension. For a nod to the style without the commitment, consider board-and-batten shutters in a bold color.
Celect Board and Batten Cellular Composite Siding in Carriage Red.
Extensive Board-and-Batten Options
The good news for builders and homeowners alike is that achieving board-and-batten looks is easy and accessible, with a range of options across materials and price points. Many traditional panel siding manufacturers offer board-and-batten profiles, combining authentic looks without the associated maintenance of wood. For example, Exterior Portfolio® Board & Batten vinyl siding features a distinctive vertical pattern profile that conveys the genuine curb appeal of real wood while delivering as a streamlined, contemporary accent. The siding features Chromatix™ technology that helps keep colors from fading. Celect® cellular composite siding offers the look alongside wind resistance up to 210 mph and a Kynar Aquatec coating for enhanced UV protection.
For styles calling for wider or customized spacing than a panel product can provide, it’s easy to create the board-and-batten look with trim, such as TruExterior poly-ash trim, which provides the look of wood alongside high performance and dimensional stability to stand up to extreme weather, ground contact, and insects.
Board and batten siding made with TruExterior poly-ash trim.
Board-and-Batten Installation Considerations
Unlike traditional vinyl and aluminum panel installation, vinyl and aluminum board-and-batten profiles install vertically. Installation instructions may vary from product to product, so be sure to follow manufacturer instructions, including requirements or recommendations for water-resistant barriers. Installers will need to account for some expected expansion and contraction, so the nails should not be driven completely flush.
Pre-planning is important for board-and-batten styles—you can’t just start on one side and go across, otherwise the look may appear off-center or you may end up with a small sliver at the end. Find the wall center and plan your layout accordingly.
Creating Board and Batten Siding With Trim
For wider or custom looks, create the board-and-batten façade using TruExterior Trim. Here’s how:
• Due to the vertical installation, be sure to use a drainable housewrap between the siding and the wood sheathing to ensure moisture has a pathway to escape the wall cavity.
• Choose 1X, 5/8”, or 5/4” trim thickness. Which one is simply a preference for the homeowner and installer.
• For a traditional board-and-batten look, use 1×12 trimboard as the board and 1×3 trimboard as the batten.
• Find center on the wall and plan your layout to determine if it’s best to start with a batten or a board at that center point; you want to avoid having only a sliver of board when you reach the outer edges.
• Once you’ve chosen center board or center batten, start by installing a board first. If it’s a center board, mark the center of the wall, line up the board, and put it in place using 6D or 8D stainless steel or hot-dipped ring shank nails every 16” (and no less than 3/4” from the board edge) directly into the plywood or OSB.
• Install boards, moving away from center, leaving 3/4” of space between each board.
• After several boards are in place, chalk a single line 7/8” from the edge of the board left or right, which will designate the edge for the batten. This results in a 9-1/2” reveal between each batten.
• Apply a bead of caulk along each side of the batten or under each side of the batten.
• Install the battens using 6D or 8D stainless steel or hot-dipped nails every 16”.
• Repeat the process, moving outward from center.
Keep in mind that paying attention to your layout, and planning it out ahead of time, is important, particularly for small areas like gables. You want the surface to be as symmetrical as possible; if you have uneven board reveals on either side, it will be very noticeable, particularly on smaller surface areas.
Lia, aka the Southern Yankee, has made a name for herself updating her farmhouse and sharing beautiful projects on a budget via her blog, Southern Yankee DIY. And it all started with a new accent wall in the dining room, which she transformed using Versetta Stone panelized stone siding.
The original dining room’s plain cream walls felt a bit ho-hum, so Lia opted to take the space to the extreme opposite, with a dark-gray wall. Rather than just paint, the DIYer chose to add texture and dimension using stone.
“I love the look of stone, especially when it’s in an interior setting,” Lia says. “I wanted to give the room something special and give it a feature. And it was so easy.”
With a lightweight, panelized format, Versetta Stone offered the ideal opportunity to create the look Lia wanted. The pieces can be cut to size outside and easily carried in. The panels connect with a tongue-and-groove system and then attach to the wall with screws, no mortar or mess required.
Lia chose the Ledgestone profile, a traditional dry-stack look, in Northern Ash, a strikingly bold dark gray hue.
“A lot of people are scared of darker colors,” Lia says. “They think it’s going to make a room feel dark or small. But I’ve found the opposite—it makes everything feel larger and more grand.”
The end result was an eye-catching accent that set the tone for the rest of the remodel. The wall became the base to inspire other parts of the home, carrying over to dark bookcases in the nearby living room and other touches.
“The whole process of installation was super simple,” Lia says. “It was a really fun project. And it’s one of those that people get intimidated by, but Versetta is simple to install and the look is so grand—it’s such a great feature in our home. We’re super happy.”
One of the most enduring trends in home exteriors today is multi-textured, varied facades. Homeowners and homebuyers tired of ho-hum, cookie-cutter houses are seeking out aesthetics to add an eye-catching pop that increases curb appeal and helps differentiate them from others on the block. For production builders, these changes can create a more appealing streetscape in communities with limited elevations.
There are a range of methods to create visual texture on the exterior façade, including blending different cladding and trim materials, mixing different profiles, and incorporating variations in color. Gables and bumpouts offer a logical place for shakes, vertical cladding, or complementary colors to elevate the façade’s dimensionality. Or consider a bold color or robust stone look for added drama.
Here are a few strategies to keep in mind as you experiment with multi-textured facades.
Play with Placement
Before you select colors and materials, take some time to play with placement. We recommend adding accent cladding (often shake, board and batten, or manufactured stone) in ways that highlight an architectural feature, like gables, a bumpout, or a new addition.
Create a Color Scheme
Working within a set color scheme will help you narrow down your cladding choices. Some homeowners may prefer to use different siding profiles in the same color to create subtle visual interest. Others like the look of complementary colors, or are interested in a high-contrast color scheme.
Similarly toned colors and small variations in texture help differentiate this facade from other traditionally styled homes. The cladding combines Exterior Portfolio Elm Grove D4 in Cypress and Country Beige, along with Exterior Portfolio Portsmouth D7 Cedar Shingles in the same hues and a subtle nod to the color scheme with tan window frames.
Incorporate Texture
A textured look can be made literally, such as from more robust materials like stone, or visually, from movement between materials and authentic, wood-like profiles.
A stone kneewall, such as this one created with Eldorado Stone’s Tundra Brick in Ashland, adds subtle variation while delivering high return on investment.
The lighter weight of panelized or manufactured stone also makes it easy to create two-story accent walls with for a truly dramatic look.
Consider Resale
Resale value is always a concern when incorporating homeowners’ tastes and preferences, so it’s important to balance a look they love without adding elements that are too garish or that will quickly feel dated. Craftsman and Arts & Crafts looks never seem to fade from favor, for example, but a trendy color like burnt orange or avocado green likely will.
Colors don’t have to be boldly different to make an impact. The brown-gray tones of the Foundry Split Shake siding, stone, and garage doors create layers of visual texture that unfold slowly on this home.
For homeowners who want to put their unique stamp on things, consider areas of the exterior that are easier to change out before resale, such as a chartreuse entry door or bright red shutters. Porch furniture, flower boxes, and bright flower beds are other ways to add bolder colors without making a hefty long-term commitment.
Stay Within the Home’s Style
Similarly, always consider the home’s overall style when incorporating different materials and profiles. For example, while shake gables are a popular approach, the texture will feel off-putting on a Southwest home. Modern-style homes are more likely to have multiple materials versus traditional, older homes. But the popularity of Modern Farmhouse has allowed buyers to create more varied looks while holding on to some authenticity.
Vertical and horizontal TruExterior Siding, along with cedar-like shakes, create visual variation across this all-white exterior.
Don’t Forget the Exterior Accessories
Trim, shutters, and columns are an excellent way to infuse style and create variation in subtle ways. Dark trim is extremely popular, adding a dramatic look against white siding without going overboard.
Leverage Online Design Tools
With so many options, it can be overwhelming for pros and consumers alike to visualize how products and colors will look on the completed façade. Free online design tools, such as Westlake Royal Building Products’ Virtual Remodeler, HomePlay, and Dream Designer, allow you to preview different product combinations on an image of the home or a similar home. Users can mix and match siding materials, profiles, colors, and accessories, helping to better ensure confident product selections and a satisfying finished façade.
With a diverse, versatile portfolio of siding, trim, stone, and roofing brands, Westlake Royal Building Products makes it easy to create multi-textured facades. Learn more here.
Brakes and saw tables from Tapco Tools offer the utmost precision to create high-quality trim bends for the finished look of custom exterior trim. As the industry leader in premium professional-grade contractor brakes for more than 50 years, our tools and accessories are efficient, durable, portable, and easy to use. Plus, we back it up with robust training and unparalleled customer support.
Here’s a step-by-step look at some of the most common trim bends you can complete on a Tapco Tools brake.
The 4 Most Basic Shapes of Trim Bends:
Some of the most common bends on a brake that can get you nearly anywhere you need to go are hemming an edge, a sill seam, simple (3/4”) step flashing, and tight (1/2”) step flashing.
J-Channel and L-Bends
Making a J-channel on a Tapco brake is straightforward, and creating a window head flashing is a very similar process.
Bending Bay Window Corner Posts
Often, installers will try to stretch a vinyl siding corner at a 22- or 45-degree bay window. Here’s a better solution.
Ready to learn more about trim bends? View more how-to videos on our YouTube channel and click here to find the right brake for your operation.
The 2022 LBM 100 from LBM Journal and the Construction Supply 150 from Webb Analytics are not just lists of the leading LBM dealers in the country—they’re a reflection of the state of the greater construction industry and its challenges and opportunities. As such, it’s not surprising that dealers reported dramatic sales increases all while navigating a series of unprecedented obstacles.
“Though the nation’s dealers continued to navigate the pandemic in 2021, the challenges that accompany it were slightly different,” LBM Journal said. “Pandemic-amplified labor shortages and continued supply chain constraints and price hikes have only worsened and have recently been joined by rising inflation and fuel costs, due in part to the war in Ukraine. At the same time, booming residential construction activity continued throughout 2021, forcing dealers to channel their problem-solving even more as they tried to keep materials in customers’ hands, deliveries on time, and expenses down.”
Growth indeed. The magazine reported that all but one dealer on the list experienced sales gains in 2021, with 29 growing 50% and 10 companies experiencing gains of 75% or more. Some of the growth was driven by acquisition, but much of it can be attributed to booming construction activity.
Skyrocketing lumber prices also played a role, Webb Analytics noted. “Largely because of softwood lumber’s 116% price increase between January 2020 and January 2022, according to the Producer Price Index, lumberyards with manufacturing operations saw their revenues shoot up 58.6% in 2021 from the year before,” the analysis said. “This group—one of five subcategories tracked in the CS150—gets a lion’s share of its revenue from sales of framing lumber as well as from manufacturing wood-based components. Thus, a huge amount of what these dealers stock sold for drastically more than it did just a few years ago.”
Here are other notable trends from this year’s LBM Journal 100 and Construction Supply 150:
• Ongoing labor woes: Not surprisingly, LBM dealers are feeling the labor strain like elsewhere in the construction industry and the rest of the country overall. “This year, 84% of companies indicated that recruiting, hiring, and retaining employees is a challenge, up 7 percentage points from last year,” LBM Journal reported. “The most difficult positions to fill, by a significant percentage, were drivers and yard workers.”
In response, dealers said they are implementing a number of efforts, from mentoring programs to pay and benefit increases.
• Price and supply: Also expected, dealers cited price hikes and tight supply as another top hurdle. “Our biggest challenge currently is extended lead times and the constant rising costs,” Charlie Parks, owner and vice president of Parks Lumber & Building Supply, told LBM Journal. “Both of these challenges make it extremely difficult to play a consistent and reliable role in our customers’ attempt to get jobs under contract.”
Yet dealers still came through for their customers. “Priority customer retention was over 95% during extremely unprecedented times in which keeping the customer fulfilled was more difficult than ever,” Parks said.
• Acquisitions abound. The trend of dealers gobbling each other up continued. Webb Analytics reported 156 deals covering 693 facilities in 2021. At the same time, 167 new facilities opened.
• Ecommerce growth: Webb Analytics said that 72.7% of the Construction Supply 150 are allowing customers to access bills online, and 58.6% are allowing online payment, a significant increase from 56.7% and 42.3% the previous year, respectively.
On the other hand, online sales are still sluggish, LBM Journal found. “Compared to 2020, fewer LBM 100 dealers—just 31%—say they conducted sales online last year. However, among those companies, more are seeing greater chunks of sales online: 3.9% are seeing 25% to 49% of sales take place online, up from 0% the year before, and 3.9% are seeing 10% to 24% of sales take place online.”
View the full LBM Journal 100 here and download the Construction Supply 150 here.
Once again, exterior projects continue to deliver the best return for homeowners’ investment, according to Remodeling 2022 Cost vs. Value Report. Within that, manufactured stone offered the second-best ROI.
The 35th annual study by Remodeling compares the average costs of 22 remodeling projects with the value those investments will retain at resale. Nine of the top 10 projects delivering the best return were exterior, with manufactured stone taking the second spot, with 91.4% ROI, behind only garage doors (93.3%). Vinyl siding also performed well, with the fifth-best return of 67.2%.
For manufactured stone, the study looked at the cost recouped from replacing a 300-square-foot band of vinyl siding from the bottom third of a home’s front façade with manufactured stone veneer (such as Westlake Royal Building Products’ Versetta Stone), along with sills, corners, and address block. Manufactured stone’s ROI was slightly lower than last year’s study, which showed a 92.1% return, but was 20 percentage points ahead of this year’s No. 3 project, minor kitchen remodel (71.2% return).
“Despite sharp cost increases in 2021, the decline in overall ROI in the 2022 report was a modest 1.2%, proving the resilience of the remodeling market,” Remodeling magazine said.
The other exterior projects in the top 10 were fiber cement siding replacement (68.3% cost recouped); vinyl window replacement (67.5%); wood window replacement (66.3%); wood deck addition (64/8%); steel entry door replacement (63.8%); and composite deck addition (62.1%).
“‘Curb appeal’ and ‘first impressions’ are strong concepts in real estate because they have a surprisingly big impact on how much money prospective home buyers are willing to pay for a home,” the magazine explained. “Prospective buyers who see a ‘buttoned up’ exterior form the impression that the house is in good shape—or, as we all like to say, ‘has good bones’—and they proceed to fit all the new information they learn once they walk through the front door around these positive impressions.”
Manufactured Stone Delivers Most ROI in Two Regions
When the Remodeling 2022 Cost vs. Value report is broken down geographically, manufactured stone shows similar levels of ROI as on a national level. In two regions, however, manufactured stone delivers the most return among all projects: South Atlantic (Maryland, Delaware, Virginia, North Carolina, South Carolina, Georgia, Florida), with 92.5% ROI, and West North Central (North Dakota, South Dakota, Nebraska, Kansas, Minnesota, Iowa, Missouri), with 93.6% ROI.
Versetta Stone offers remodelers an easy way to leverage the ROI opportunity of manufactured stone. The siding panels provide the beauty and texture of authentic stone masonry in a panelized, mortarless format that can be installed easily by traditional carpenters and siding contractors using nails or screws. Each lightweight panel covers 2 square feet and features a built-in rainscreen. Browse profiles and colors here.
See the full Remodeling 2022 Cost vs. Value Report study and associated trends at www.costvsvalue.com.
May is National Home Remodeling Month, the NAHB’s annual celebration that spotlights the remodeling industry, recognizes the expertise of remodeling professionals, and showcases the myriad benefits of hiring a professional remodeler. Westlake Royal Building Products is proud to be a sponsor of the 2022 event.
For National Remodeling Month, the NAHB encourages remodelers to leverage tools and tips to promote the industry through the local press, social platforms, and in-person fairs, seminars, and tours. Available resources include social media posts, web banners, press releases, fact sheets, and other materials, along with government proclamations, customizable educational articles, and op-eds. Get started with their Step-by-Step Guide here, get promotion tips here, or access downloadable promo materials here.
As part of its sponsorship, Westlake Royal Building Products is hosting several events for NAHB members during the month of May, including:
• Shop Talk session featuring Chris “CJ” Johnson, Director – Product & Marketing – Siding, Westlake Royal Building Products, discussing the topic of product warranties.
• Webinar “Addressing Multi-Faceted Needs in AIP & UD Renovations,” May 18, which will address multi-faceted needs in aging-in-place and universal design renovations (Sign up here)
Along with professional tools, the NAHB provides a consumer resources portal, with tips on how to choose a professional remodeler, links to find a remodeler in their community, and design trends.
One of the many benefits of working with Kleer cellular PVC trim, Royal cellular PVC trim & mouldings, and TruExterior poly-ash trim is that they not only offer lower maintenance and fewer hassles than wood, but also provide authentic looks and similar workability. Depending on the look of your exterior project or outdoor space, the materials can be milled and routed to meet authentic, architecturally correct custom exterior trim.
Here’s a look at some of the ways builders and remodelers have used Kleer, Royal, and TruExterior trim to deliver unique looks alongside long-term performance.
Intricate Details
When it comes to Kleer, Royal, and TruExterior, the limits of workability for custom exterior trim are bound solely by one’s imagination. Nearly any look can be achieved, all with the peace of mind of long-term durability and low maintenance.
For example, TruExterior trim can be fabricated into an array of profiles typical of wood, from crown molding and gingerbread to columns and balusters to custom siding profiles.
DURATION Moulding & Millwork uses TruExterior to craft an array of standard trim profiles, including base cap, casing, quarter round, panel mould, and cove.
Cove moulding crafted from TruExterior by DURATION Moulding & Millwork.
The company also custom-engineers solutions for any need using TruExterior, including balustrades, columns and wraps, arches, and pre-assembled window surrounds.
A pre-assembled window surround made with TruExterior by DURATION Moulding & Millwork.
DURATION Moulding & Millwork used TruExterior to recreate Gothic columns, pilasters, decorative scroll work, crown, custom fascia, and dentil fascia, for an 1870s remodel. (See more about this project here.)
Royal Sheet Board is made for specialty projects, cutting cleanly for applications ranging from simple and modern to elegant and ornate.
Fabricators used Royal Sheet Board to craft the unique detailing on this church.
Kleer trim is often used to make pergolas, corners, fascia, soffits, rakes, casings, cornices, and all kinds of other applications.
Kleer trimboard also can be used to create curves and arches using heat-bending techniques.
TruExterior’s workability was ideally suited for a Queen Anne-style home by Architect David Williams McKee in the historic resort community of Chautauqua, N.Y. Using TruExterior for the detail work, including turned porch posts, decorative millwork, brackets, balusters, and gingerbread trim, ensured both an accurate look and high performance.
Cozy Accessories
Both Kleer and TruExterior make it easy to add fun to backyard settings, with easy crafting into chairs, planters, and even cornhole boards.
Kleer Lumber was used to craft these Adirondack chairs.
Balcony planters, brackets, and trim make with Kleer Trim.
TruExterior can be painted any color, including dark hues, and also can be stained. This rustic planter box was made with trim scraps and a custom finish to create the look of old barn wood.
Learn more about the extensive range of trim options from Kleer, Royal, and TruExterior here.
Most people don’t consider vinyl an eco-friendly building product, but data show it actually is. There are misconceptions that vinyl siding doesn’t have sustainable design, production, or operations. But vinyl outperforms almost all other common cladding materials, including fiber cement and brick, in total environmental impact.
While the classic look of wood is forever timeless, new developments in design allow vinyl siding to look and feel like real wood, down to the actual grain. With vinyl, you can eliminate the cost and maintenance of wood and choose a sustainable, durable, and affordable alternative. If you, your company, or your customers are dedicated to greener construction and building practices, then vinyl siding is for you.
Less Waste
From production to construction, vinyl siding produces less waste than other building materials, such as brick and cement. Vinyl siding products require minimal raw material and produce virtually no waste. They also require less water and energy to produce than other building materials.
Lower Impact
Vinyl siding also maintains a low environmental impact over its lifespan. The National Institute of Standards and Technology (NIST) developed Building for Environmental and Economic Sustainability (BEES) software to measure specific environmental concerns such as air pollution, acidification, and global warming potential in the environmental life cycle of products.
Throughout its life cycle, vinyl releases significantly fewer toxic chemicals into the environment than other siding materials and has a lower overall environmental impact.
Compared to vinyl siding, construction materials like fiber cement contribute 4x to global warming potential, 2x times to acidification, and over 3x to air pollution. Compared to other common sidings, vinyl performs amazingly well. According to the NIST, vinyl has a lower environmental impact than brick, and even rivals some wood siding.
Infographic courtesy Vinyl Siding Institute
Westlake Royal Building Products uses PVC resin as the backbone of Royal and Exterior Portfolio vinyl siding. This is derived from components in nature, such as common salt and natural gas, that make PVC weather-resistant, chemically stable, and lightweight.
Recyclable
While some argue that wood is a more eco-friendly siding option because it is biodegradable, vinyl siding lasts longer and is recyclable. Vinyl siding is recycled with post-consumer recycling, post-industrial recycling, and closed-loop recycling, meaning every part of its production and lifespan lends it to being easily reused.
Recycling reduces waste disposal and extraction of new materials while reducing landfill accumulation and incineration. Both lead to an increase in greenhouse gas emissions. Because of the nature of PVC, vinyl is a thermoplastic that can be ground up repeatedly, re-melted and formed into various new products even after the life expiration of the original product.
According to the Vinyl Siding Institute, 99% of scrap in manufacturing is recycled into other products rather than being sent to the landfill.
Longevity
The longevity of vinyl siding is part of what makes it so eco-friendly. Although recycling is an important component of sustainability, vinyl lasts such a long time it is unlikely to end up in the waste stream anytime soon. Many warranties on vinyl siding last for 40 years or more, meaning it doesn’t have to be ripped out and replaced very often.
Not only is vinyl long-lasting, but it’s low maintenance. Exterior siding that requires less care saves resources and reduces emissions and chemicals.
Thanks to innovative technology and sustainable practices, PVC vinyl siding is perfect for giving homeowners the aesthetic and performance they are looking for, while offering the peace of mind that our products were purpose-built to support a sustainable alternative and future.
The exterior of any home is its first impression, introducing its unique style to any potential buyer or visitor. Peeling, faded, or streaked paint on the trim may evoke feelings of poor quality and can lower the curb appeal. Breathing new life into exterior trim with paint—and ensuring its fresh look lasts—is easy to do if you follow a few simple strategies.
Whether you’re installing new trim or rehabbing the trim of an existing home, consider these tips for an enduring appearance.
1. Prep the Exterior Trim for Painting
Before you grab a brush and start painting, there’s some essential prep work to do first. Start by taking a close look at all the exterior trim you’re going to paint. Make note of and fix any imperfections and problem areas. For example, if there are spots where old paint is peeling, scrape it off before putting on a fresh coat.
Next, pressure wash the areas you’re going to paint to remove dirt and debris. Be careful not to use too much pressure; if you notice damage to the surface, pull the nozzle farther back. Be sure to power wash every area you expect to paint, even if there’s no visible debris.
For the last stage of prep, fill any holes or gouges in the exterior trim with caulk (make sure the caulk is suitable for exterior applications and for the specific trim material). After you fill the holes, wait for the caulk to dry, and then sand off any excess until it is flush with the rest of the trim.
2. Choose the Right Paint for the Job
Once the trim is prepped, make sure you use a paint that is compatible with the trim material. For example, with Westlake Royal’s Kleer PVC Trim, use an acrylic latex paint for the best results; TruExterior poly-ash siding can be painted with any high-grade exterior paint per the paint manufacturer’s instructions.
Once you’ve figured out what type of paint is needed, the next step is choosing the right color. Selecting a paint color comes down to a number of factors, including the home’s style, current trends, and homeowner preferences. Check out our previous blog post for advice on making confident color choices.
Keep in mind that not all materials are suitable for all colors. For example, vinyl or PVC products painted in dark hues may absorb more heat, causing them to expand and contract. Using urethane construction adhesive along with mechanical fastening may help minimize this for Kleer trimboards. Conversely, TruExterior poly-ash trim, which has a higher level of dimensional stability, can be painted dark hues, even black.
3. Use Proper Exterior Trim Painting Technique
Whenever you dip your brush into the paint, be sure to fully immerse the bristles. This makes the project more efficient and spreads the paint out more evenly. When it’s time to reapply paint to the brush, avoid wiping it along the rim of the can. Instead, tap the brush on the inside of the paint can to lessen the risk of paint drips for a more polished look.
For the best appearance, apply the paint in long single strokes. It’s also a good idea to have a variety of brush sizes ready in case you encounter narrower surfaces or tight spots.
Finally, you’ll want to apply multiple coats to the exterior trim. Wait until the first coat is completely dry, then lightly sand it and begin a second coat.
Have questions about painting Kleer trim or TruExterior trim? Our customer service team is ready to help. Reach them here or by calling 800.521.8486.
The last two years brought significant change to all aspects of our lives. To make their homes more comfortable, functional, and beautiful, homeowners—now more than ever—are willing to spend more on home renovations, both interior and exterior.
As the pandemic shifted lifestyles and altered our overall sense of what’s important, so followed consumers’ approach to the design and livability of their homes. Here’s a look at how these new realities translate into key exterior and interior design trends and changing product designs and innovations.
1. Biophilic Design
Biophilic design—the use of natural or nature-inspired materials and textures within a space—remains one of the hottest design trends for both residential and commercial properties. This allows them to feel connected to the natural world even when they’re indoors, and it has a marked benefit to people’s physical and mental health.
Incorporating natural colors and textures—including greenery, accent pieces such as water or fire features, and light wells and stone veneer statement walls—into the built environment can provide inhabitants with multisensory components and connections with the outside world. Natural light is key to any space, and research suggests incorporating more sunlight can help with everything from reducing overall stress levels to encouraging healthier sleep patterns.
2. More Is More: The Resurgence of Maximalism in Design
Many homeowners are stepping back from the “less is more” movement and embracing Maximalism instead, where “more is more.” The beauty of Maximalism is that it allows their space to be as unique and expressive as they are. Designers and building pros should start the process by asking the client to consider, quite simply, themselves.
One of the true joys of Maximalism is the freedom to be bold in their color choices, in terms of color selection, layering, and juxtaposition. For example, an accent wall with architectural stone veneer in a lighter, more neutral color palette provides the ideal backdrop for incorporating bold colors. With those bolder colors, an overarching scheme will help maintain a sense of cohesiveness and intention.
Cultured Stone’s Echo Ridge Old Country Fieldstone
The key to achieving a Maximalistic masterpiece is the incorporation of both patterns and textures. Consider scale and pair larger patterns with small prints. A large-scaled stone or brick accent wall is a clever way to achieve this look and find balance by incorporating depth and texture without overpowering the eye and taking away from the unique appeal of the space.
For exteriors, choose bold and darker colors of siding and/or trim, wider siding profiles, and Craftsman-style trim.
Westlake Royal Building Products’ Atlas Stone in Sierra and Cedar Renditions 6″ Aluminum Siding in Timberline.
3. Optimizing Your Outdoor Space
More than ever before, the outdoors has provided us with our most favorite bonding experiences. Making memories under a canvas of stars can happen without needing to travel any farther than our own backyards.
Outdoor spaces allow homeowners to expand their living area without adding interior footprint, and they’ve continued to blur the lines with designated activity areas and inclusion of interior comforts from entertainment to furniture. Outdoor dining was already on the rise for years, and it’s now more attainable than ever before. Today, there are more options at varying price points for elevating the outdoor space, including rapid-install outdoor kitchen “building blocks” that can be custom ordered and configured to match the exact appliances and countertops they prefer.
Zuri Premium Decking in Weathered Grey
For kids, creating a unique play space, such as with a play structure or treehouse, provides ample opportunities for them to be physically active while spending time in an outdoor space that is primarily “theirs.”
And, of course, nothing complements an evening outside better than the warmth and glow of a fire. An intentional conversation space anchored with a fire bowl or fire pit elevates the ambience as they build and reinforce personal connections.
Sherwood wood-burning fireplace from Kindred Outdoors + Surrounds
4. A Dash of Rustic Allure: Unique Accents in the Kitchen
The kitchen is the heart of the home, yet so much of what we think about during the kitchen design process is focused solely on function over form. For a space as universal and iconic as the kitchen, there is more we can explore to infuse character into its walls.
Tile backsplashes provide an immensely versatile range of options for incorporating colors and patterns, but for those looking to incorporate a touch of texture on the walls, brick veneer remains your best bet. (A “brick-splash,” if you will.) And nothing complements the vibrancy of natural light quite like other natural textures, so a light stone accent wall could be ideal when pulling off a kitchen transformation; stone or brick veneer offers a transitional style, providing a contrast to sleek, modern cabinetry, fixtures, and appliances.
Eldorado Stone’s Lucera Hillstone veneer adds rustic warmth to this otherwise modern-leaning kitchen.
When updating the accent wall, consider tying in some of the other color tones in the space. And don’t rule out the power play of white-on-black or gray-on-white.
5. Balancing Modern with Traditional
Design styles are shifting from minimalist and clean lines toward something with more personality and character. When it comes to stone, consumers are looking for traditional-style stone with a modern, clean color palette. On the exterior, the Modern Farmhouse continues to trend, in part for its blending of comforting traditional elements with modern accents, mixed materials, and a subtle contemporary vibe.
Architect Michael McKinley’s modern interpretation of the traditional farmhouse, featuring TruExterior Nickel Gap siding and InSpire Roofing in Olive, Ash Grey, Evergreen, and Red Rock.
6. Metro Mojo: Urban Aesthetics for the Sophisticated Suburbs
Since early 2020, numerous surveys show a significant bump in the number of people moving from the cities to the suburbs or rural areas. Transitioning from one environment to another in this way can be emotional, especially if you’ve acclimated to a metropolitan vibe. As a significant portion of the population shifts from one setting to another, it’s likely that some of the most prominent design trends and other aspects of city life will soon take root in suburban areas as well.
To help your clients bring a chic, cosmopolitan feel to their new abode, consider accents such as brass hardware on kitchen cabinets, a statement lamp in the entryway, or dark, industrial-like windows.
Versetta Stone siding panels in the Ledgestone profile and Sand color.
Westlake Royal Building Products’ portfolio of siding, trim, stone, and roofing brands offer a diversity of styles and options to meet the needs of your buyers’ shifting tastes and needs. Learn more here.
After going virtual in 2021 due to the pandemic, the International Builders’ Show returns in-person, and returns to Orlando, Feb. 8-10, 2022. Once again the show is co-located with the Kitchen & Bath Industry Show (KBIS) for Design & Construction Week.
Along with general excitement for the return of face-to-face events, here are some must-dos to help you get the most out of your show experience.
Educational Sessions
As usual, the IBS conference is packed with helpful sessions, including trends, design, installation, and business tools. Here are a few that caught our eye:
In addition to cruising the exhibit floor and attending knowledge sessions, you can see the latest in design and product trends through show homes and tours. This year, these include:
• ProBuilder Show Village Located just steps outside the convention center, this year’s Show Village features four homes that respond to what people value today: greater flexibility, more private outdoor space, and safety and health as a top priority. Take a self-guided tour, watch live how-to demos, view exclusive exhibits, and more. More details: https://pbshowvillage.com/
• The New American Home Each year, The New American Home showcases the newest products and design trends, as well as the latest construction practices that ensure efficient, durable homes. This year’s show home is located in Laureate Park at Lake Nona and is being designed to achieve National Green Building Standard “Emerald” certification, Energy Star Certification, Indoor airPLUS Certification, DOE’s Zero Energy Ready Home Program Certification, and net-zero. Details and tour/shuttle ticket info: https://www.tnah.com/
• The New American Remodel This year’s New American Remodel is a one-story, 6,993-square-foot property featuring indoor-outdoor living, a detached guest house, and a luxurious summer kitchen. Like The New American Home, it is being remodeled to achieve National Green Building Standard “Emerald” certification, Energy Star Certification, Indoor airPLUS Certification, DOE’s Zero Energy Ready Home Program Certification, and net-zero. Details and tour/shuttle ticket info: https://www.tnarh.com/
• IBS Building Zone Get the latest expertise on building more durable, energy-efficient, higher-quality homes. Across the three days, you’ll find how-to demos, presentations diving deeper into demo techniques and best practices, and full-size displays of walls, roofs, and other components for an up-close look at the details being discussed. More details: https://www.buildersshow.com/focus/focus.aspx?showPageID=21226
• Outdoor Living Pavilion Head to the South Hall for the Design & Construction Week Outdoor Pavilion, showcasing the latest outdoor/backyard products, from decking to lighting to appliances.
See What’s New From Westlake Royal Building Products at booth W2520
Boral Building Products recently joined the Westlake Exteriors family, and we’re excited to see you at IBS at the Westlake Royal Building Products booth, #W2520. IBS marks the official debut of the new Westlake Royal Building Products brand, bringing together the rich legacy of three leading North American Building Products Manufacturers: Royal® Building Products, Boral® North America building products, and DaVinci® Roofscapes.
At our booth, you’ll find a breadth of innovative exterior and interior building products, including the brand-new 5/8” Lap Siding from TruExterior. The new profile combines the coveted look and shadow lines of traditional lap siding with the high performance of TruExterior’s poly-ash material.
Get your free Builders’ Show expo pass, which includes access to the exhibits at both the International Builders’ Show and the Kitchen & Bath Industry Show, here: https://ibs22.buildersshow.com/928
Renderings aren’t a new concept—architects have relied on them for decades, and builders have often employed them for marketing materials. But advancements in technology for renderings and computer-generated images (CGI) are making these tools even more relevant to home selling, both as a way to market and sell homes as well as to assist buyers with purchasing decisions. And as the pandemic accelerates virtual selling, builders who don’t get on board might find themselves falling behind with digital-savvy (and digital-expectant) younger buyers.
We checked in with Bob Masulis, president of RM Design Studio in Bartlett, Ill., about the importance of leveraging today’s visualization tools—and why they’re more important than ever.
What Are the Benefits of Using Renderings?
For those who specialize in renderings and CGI, the goal is, essentially, to make a pretty picture, Masulis says. “Whatever you’re selling—a property, a product—you come to us to create something cool for marketing.”
Drawings and renderings are not new in brochures and marketing materials, but new innovations and better imaging are elevating their use. In new master-planned communities, CGI and virtual experiences fill the void before model homes are built.
Floor plans just aren’t sufficient to help potential buyers fully understand and experience the eventual finished product, but realistic renderings and CGI give them the ability to see the kitchen, bathrooms, family room, etc., providing a better understanding of what’s being built.
This means the builders and developers are able to cost effectively show their home the day the community opens for sale, adding tremendous marketing capability that can accelerate the sales process to help save time and money in the long run.
Along with more realistic and relatable visuals compared to a flat floor plan, renderings offer the right size and scale, which makes it easier to compare the sizes of the rooms. They also can show features less visible in a plan, such as a tray ceiling, without the buyer having to decipher small words and labels.
“It gives people a feeling for what the homes in the community will look like—it gives them physical and emotional scale,” Masulis notes. “It takes undefinable numbers and measurements and turns it into something emotional.”
Renderings also can help strengthen the community approval process. RM Design Studio, for example, can take a developer’s sketch and turn it into a rendering that looks like it’s been designed and photographed, elevating presentations for public hearings and design review boards.
Rendering featuring TruExterior 6″ Nickel Gap Siding painted dark grey, TruExterior 6″ Nickel Gap siding painted red, and Versetta Stone panelized stone siding (Tight-Cut profile in Terra Rosa).
What’s Changed With Renderings?
Of course, renderings aren’t a new concept. But computers and technology have advanced rapidly over the past decade—just in time to keep up with surging demand for digital-first sales.
Builders typically can only afford to build about three models, no matter how many plans they offer, relying on floor plans for the rest. But now, with CGI, you can very affordably build out the other models in virtual mode, allowing home buyers to see them in a way they’re more comfortable with. This not only opens up all models the day sales begin, it ensures a more balanced playing field for all plans.
Rendering featuring 7″ Foundry Split Shake siding in Eggshell 034, green vinyl lap siding, Versetta Stone panelized stone siding in Tight-Cut Sand, and Mid America three- and five-board spaced shutters in Tuxedo Grey 018.
These innovations have been especially welcome during the pandemic, as buyers have embraced virtual experiences to reduce in-person contact or shop from afar. Even as social distancing needs ease, expect these virtual selling tools to continue, particularly as Millennials and Gen Z become the chief buying demographic.
Using CGI tools provides for easier product swaps, as well. If products are discontinued or trends change over the course of a multi-year community build, they can be easily switched out in the virtual tours and renderings. It also allows builders to adjust and re-use the virtual models in other communities.
Virtual walk-throughs using computer-generated images immerse the buyer in the experience similar to touring a model home in person—they can spin around, “walk” from room to room, zoom in, learn more about features and products, and even swap out colors and materials.
You can experience this type of technology for yourself at Show Village during the upcoming International Builders’ Show. In addition to in-person tours, visitors near and far can tour the two demonstration homes via an “Immersive Home Experience” on their laptop, tablet, or smartphone. Virtual host “James” will point out key features, and visitors can click on icons for more details on various products and design elements.
The advantages don’t just benefit large builders and developers. For smaller operations selling small communities of semi-custom homes, virtual models can provide much-needed marketing relief and help sell the home before it’s completed, providing time to make changes to suit each buyer’s preferences.
Rendering featuring Versetta Stone panelized stone siding (Tight-Cut profile in Northern Ash) and TruExterior poly-ash siding (6” Channel Bevel and 10” Nickel Gap).
For custom builders, renderings and CGI help buyers visualize how certain design decisions will impact the look and livability of their home. For example, Masulis used CGI to design his own kitchen remodel, and experimenting with the colors made him realize that the all-white cabinets he’d planned needed some balance with wood grain or color on the island. (See a similar process for yourself with Boral Building Products’ Virtual Remodeler tool.)
This type of visualization provides tremendous power for builder and buyer alike. By leveraging the capabilities of CGI and virtual selling tools, builders can not only more effectively sell, but can bring welcome confidence to customers that they’ll be getting the home they envision and the home of their dreams.
Whether in renderings or in person, Boral Building Products’ portfolio of siding, trim, and accessory brands offer a diversity of styles to meet the needs of your buyers and communities.
As we embark on a new year, some familiar stories are influencing home and remodeling trends. Most notably, the pandemic, with homeowners continuing to fill their stay-at-home time with projects inside and out. Supply chain and labor challenges persist, but aren’t stopping building pros and DIYers alike from creating beautiful spaces to live and work.
Here’s a look at some of the biggest trends in home exteriors this year:
1. Remodeling Reigns
The combination of the pandemic and low new-home inventory continues to drive interest in remodeling projects, despite ongoing supply chain challenges. Everything is on the table, including exterior revitalization and interior overhauls. On the exterior, homeowners tired of looking at faded, dated facades are replacing siding with authentic-looking profiles and trendy-but-resale-friendly colors. Alternatively, they’re adding easy upgrades such as new shutters, gable vents, and mounting blocks for a quick-but-impactful refresh.
2. Outdoor Living Going Strong
Not surprisingly, the trend toward outdoor living spaces endures, as Americans seek to expand the livable footprint of their homes, crave places of respite, and desire more space to entertain. And they’re looking for the comforts they enjoy indoors to be available outside, from stylish seating areas to outdoor heaters to decked-out kitchens and TVs.
When planning the outdoor space, look for ways to create designated areas, whether via multi-level decks or by creating visual breaks with different color deck boards used as picture framing or dividers. Fire pits or fireplaces are a must-have and can be dressed up with less hassle and lower costs by using a panelized stone product.
3. Modern & Contemporary Looks
Modern styles or contemporary twists on traditional styles continue to come on strong, and are migrating from the coasts to some traditional markets in the Midwest. Think single-sloped roofs, clean lines, and less ornamentation. Part of these trending looks includes the move toward black window frames, black stone accents, and black or dark-colored trim, often paired with white siding. (TruExterior poly-ash trim is a great option for this trend, as it can be painted dark colors, even black, without worry.)
Even in areas like Charleston, S.C., where traditional styles are beloved (and often mandated), small contemporary touches are appearing, including dark trims, dark stone, and black gutters. But here, traditional siding colors of light blues and neutrals remain the norm.
Within this trend, mitered corners are growing in popularity, providing the crisp, sleek look that works well with contemporary designs or provides a nod to modern. TruExterior works well here, too, because there’s less worry about cracking and splitting, so the look stays clean over time.
4. Modern Farmhouses Are Still In
Despite some predictions, social media and community models are still dominated by interpretations of the modern farmhouse look. Along with white, vertical siding, we’re seeing wood accents that are helping to keep the styles warm and cozy.
5. Vertical Siding
Not surprisingly, the modern farmhouse craze has driven interest in vertical siding for other types of homes, as well, especially in accent gables. Board-and-batten is taking market share from shake in some traditional regions.
6. Low Maintenance
When it comes to product durability, the desire for low maintenance materials remains strong. Homeowners are willing to pay a little more for products that don’t require frequent upkeep that costs them time and money year after year. This includes turning to siding alternatives that look like wood but don’t require regular painting or staining.
7. Easy Installation
As labor shortages persist, and as stuck-at-home homeowners tackle DIY projects on their own, products that can be installed quickly and easily will continue to hold favor. For example, Versetta Stone panelized stone siding installs with nails or screws without sacrificing the sought-after look of stone, making it an easy option for exterior siding, interior accent walls, and fireplace surrounds.
With a portfolio of siding, trim, and accessory brands, Boral Building Products makes it easy to respond to the trends in your market. Learn more here.
Foundry’s Grayne Shingle Siding not only offers a beautiful aesthetic that replicates the look of cedar, it’s easy to install with minimal waste.
How easy? Check out our new three-part video series where contractor and educator Mike Sloggatt outlines the steps and best practices along the way.
Chapter 1: Getting started
Learn how to mark reference lines, including using a story pole to reference off the control line, preparing outside and inside corners and flashing, and installing the starter strip
https://www.youtube.com/watch?v=CNnAAU2e0ao
Chapter 2: Layout
In this part, learn how to offset the panels to avoid repeating patterns and best practices for cutting panels.
https://www.youtube.com/watch?v=wrfJ7BpiLGE
Chapter 3: Installing the Panels
Learn how to install the panels, including preserving the offset pattern, proper gapping, locking in the panels, and proper nailing and nail placement, as well as installing inside corners and starting on an adjacent wall.
https://www.youtube.com/watch?v=b8i7egtIwAw
Learn more about Foundry Grayne shingle siding here.
Fine Homebuilding magazine recently completed its 2020-2021 demonstration home, the magazine’s first remodeled show house, in Greenwich, Conn. The 80-year-old house underwent a transformation that included a dramatic modernization in style and a deep energy retrofit.
The team updated the home’s layout, opening it up inside and infusing it with a Scandinavian-inspired aesthetic. The team tackled the homeowners’ desire for high performance through a range of details, including air-sealing, insulation, and mechanical systems, with a goal of net-zero energy and Passive House performance.
The original cedar exterior was transformed by TruExterior Shiplap Channel siding in a vertical orientation and painted in Benjamin Moore’s Glacier White to complete the Modern Farmhouse look. TruExterior’s reversible Shiplap-Nickel Gap profile provides a finishing touch on the gable around the balcony door and on the porch ceiling.
“TruExterior is really unlike any other siding or trim material on the market,” said Fine Homebuilding’s Justin Fink. “It cuts and handles just like wood, but it’s more durable, more temperature stable than PVC, and it takes paint beautifully.”
Three major paint manufacturers—Benjamin Moore, Sherwin-Williams, and Behr—have released their 2022 Colors of the Year. Surprisingly, all three are various shades soothing, subtle greens. Less surprising are the common adjectives and themes that guided their selections, with words like “calm,” “fresh,” “cool,” “peace,” and “hope.” After two years of the pandemic, the trending color palettes reflect not only our collective need to create a peaceful sanctuary at home, but also infuse modern creativity to find our passions and move forward.
Here’s a closer look at the three color palettes.
2022 Colors of the Year
Benjamin Moore named October Mist as its Color Of the Year 2022. “The gently shaded sage quietly anchors a space, while encouraging individual expression through color,” the company says.
Image courtesy Benjamin Moore
October Mist is one of 14 hues in a palette the company calls, “harmonious yet diverse, reliable yet whimsical, and meditative yet eclectic.” The collection includes luminous pales such as Hint of Violet and Quiet Moments, botanicals like Pale Moon, and refreshed primaries such as Wild Flower.
Sherwin-Williams’ Color of the Year 2022 is Evergreen Fog, a simple but sophisticated green-gray that the company describes as soothing and subtle. “Get a fresh start with a restorative shade that breathes freshness into modern interiors,” the manufacturer says.
Image courtesy Sherwin-Williams
Evergreen Fog pairs well with nature-inspired hues like Urbane Bronze (the manufacturer’s 2021 Color of the Year), Uber Umber, and Woven Wicker for a modern, organic feel.
Behr’s Color of the Year—Breezeway—is “a silvery green shade with cool undertones,” the manufacturer describes. “The color is inspired by naturally stunning sea glass found on the shore of salty beaches. … It evokes feelings of coolness and peace while representing a desire to move forward and discover newfound passions.”
Image courtesy Behr
In its Color Trends 2022 Palette designed to inspire a hopeful start to the new year, Behr pairs Breezeway with 19 soothing shades and warm tones ranging from a muted clay-pink Sunwashed Brick to a bold terracotta red Perfect Penny.
Though the colors of the year tend to address interiors, it’s important to consider the flow from inside to out. Rather than strict lines between bold exteriors and relaxed interiors, a fluid progression is worth considering to ensure harmony as homeowners frequently blend indoor and outdoor living.
Foundry Shakes
Ready to take advantage of the latest color trends? Boral Building Products’ exterior siding and trim products offer the perfect opportunity to incorporate similar hues to the Colors of the Year. Check out the range of muted neutrals available from Foundry Siding (like the Shakes pictured above), learn how Atlantic Shutters can be matched to nearly any color, and explore how TruExterior Siding & Trim can be painted any color, making it easy to respond to the latest preferences.
With construction going as strong as ever and labor shortages prominent around the country, slowing down for cold, wet weather isn’t always an option for many workers. Here are a few winter work gear picks to help keep you comfortable on the jobsite as the temps start to drop. (Disclaimer: Boral Building Products is not affiliated with the following companies and does not endorse the products.)
Insulated Bomber Jacket
New from Duluth Trading Co.’s 40 Grit brand, this bomber jacket is made with durable 9.9-ounce 100% cotton twill, a quilted insulated polyester lining, metal rivets at pressure points for added durability, and a ribbed collar, hem, and cuffs to keep out the cold. The jacket includes pen sleeves, snap-close handwarmer pockets, a utility chest pocket, and an inside pocket, along with a back loop for hanging.
Waterproof Work Boot
Combining durability and protection with cushioning and comfort engineering, CAT Footwear’s Accomplice X waterproof steel-toe work boots are ideal for everyday use, the company says. Features include a soft, breathable nylon mesh sock lining with pro-biotic odor control, a durable rubber outsole for traction, and Cement Construction for a durable-yet-lightweight feel.
Base Layer Pants
Designed for mild to cold conditions, Ergodyne’s N-Ferno 6481 Lightweight Base Layer Pants are made with lightweight, breathable stretch fabric to keep you warm without overheating and without a constricting or bulky feel. For added comfort, the pants also feature an elastic waistband, moisture-wicking technology, anti-odor technology, a breathable mesh fly, flatlock seams, and a tagless interior. The pants are machine washable.
Heated Jackets
Milwaukee Tool has launched the next generation of its M12 Heated ToughShell jackets. Powered by the company’s M12 RedLithium battery technology, Heated Gear distributes heat across body areas via carbon fiber heating elements woven in between exterior materials and thermal insulating liners. The new M12 Heated ToughShell features Stretch Polyester with 80% more stretch and five times longer life, offering better mobility and flexibility while being lightweight and comfortable. The new jacket heats up in 2.5 minutes and allows for battery placement in the front or back depending on the situation.
Hi-Vis Hoodie
This hooded sweatshirt from Blaklader offers added warmth in high-vis yellow or orange. It features a large front pocket; interior phone pocket with zipper; a fixed, adjustable hood; and a ribbed hem. The sweatshirt includes reflective tape on the body, sleeves, and shoulders.
Winter Work Gloves
The Coldwork Original work glove from Mechanix is made with heavyweight fleece and C40 3M Thinsulate insulation, along with water-resistant SoftShell on the back to block out wind. The gloves’ palm side features synthetic leather with touchscreen-capable technology. Other details include a thermoplastic rubber closure for a secure fit and Armortex thumb saddle reinforcement. Five sizes are available.
Knit Beanie
This classic beanie from Dickies features a 4-inch fold-up cuff for a customizable fit. The hat is made with soft acrylic to trap heat and keep the head warm and comfortable. Fifteen colors are available, including neon yellow (shown), neon orange, black, brown duck, aged brick, oatmeal, and white.
Whether they own or rent, people want to be proud of where they live and feel good coming home. And whether it’s a custom single-family bungalow or a condo in a three-story multifamily building, first impressions are everything and comfort is paramount. Multifamily dwellers don’t want to sacrifice simply because they share walls and common areas—and savvy developers and builders are responding by paying closer attention to exterior facades and outdoor amenities.
Multi-Textured Facades
Many trends trickle over from single-family design, and that’s certainly the case with the drive toward multi-textured facades. The days of building a 120-unit monotone apartment building with plain block under gray vinyl are fading fast. Like single-family homes, more multifamily properties are emerging with a blend of cladding materials and colors, such as stone and siding, EIFS and stone, or stone and brick. Leveraging multiple textures adds visual interest while adding dimension and differentiation between buildings, while accents and trimwork provide essential finishing touches. The resulting looks lean more home-like and comfortable instead of industrial and one-note.
Versetta Stone and TruExterior Siding offer an ideal combination for achieving these looks. Versetta Stone siding offers the look of stone but with a panelized format that installs like traditional siding along with a built-in rainscreen. Made with poly-ash technology, TruExterior Siding comes in a range of authentic profiles and can be painted any color, including dark hues that look great in multifamily buildings in urban or suburban areas.
Along similar lines, we’re seeing variation in dimension, with more balconies, decks, recesses, and bumpouts. Along with adding aesthetic appeal and differentiation, these features can help define individual units.
Because multiple materials also often means multiple trades, it increases the risk of failure in the wall system. Extra caution should be taken to ensure everyone works together and plans ahead collaboratively and schedules thoughtfully to ensure the integrity of the air and water barriers.
In fact, it’s wise to create a small-scale mockup, which will allow for more careful planning and upfront identification of problem areas.
Outdoor Amenities
COVID-19 lockdowns were harder on multifamily dwellers, who don’t have spacious yards to escape to, and further brought attention to the need to incorporate outdoor features into condo and apartment buildings. Creative incorporation through balconies, roof decks, courtyards, and pocket parks should be top of mind for builders, as the desire for these spaces isn’t likely to fade even as the pandemic does. Shared outdoor areas with fire pits and lounge seating are an ideal way to not only provide more room to move, but also build a sense of community that may keep tenants in place for longer.
The pandemic also saw a significant increase in pet ownership, so incorporating dog parks or dog-friendly areas also can be beneficial to residents and property managers alike.
On the transportation front, the impact of both electric bikes and electric cars shouldn’t be ignored. Consider not just space for bicycle parking, but covered areas that can protect electric bikes. And factor in spaces in your parking facilities that can accommodate car charging.
Fannie Mae expects the trends that helped multifamily turn around in 2021, following the impact of the pandemic, to continue elevating demand for the next five years. Ensure your properties are at the top of buyers’ and renters’ lists by keeping aesthetics, performance, and occupant comfort top of mind.
Creating multi-textured facades is easy with Boral Building Products’ portfolio of siding, trim, and accessory brands. Learn more here.
For your homeowner customers, Foundry siding offers the ideal combination of features: The authentic look of cedar without high maintenance. That means years of curb appeal without worry or hassle. But along with these features that make Foundry an easy sell, vinyl siding also offers a host of benefits directly for you, thanks to easy installation, light weight, and low waste.
Here’s a look at the business benefits of vinyl siding, courtesy of the Vinyl Siding Institute.
There’s perhaps no better origin story for a wedding venue than one that begins with its own proposal and labor of love.
Jim and Debra Scano were strolling the land they had owned since 2015. Jim knew he wanted to build something near the pond, and Debra suggested he design them a place to get married. And thus Bella Terra was born.
The stunning venue, located in Gunter, Texas, near Dallas, blends the aesthetics and amenities of a barn setting with an elegant flair and modern sensibilities. Along with the interior volumes one would expect, catering to more intimate gatherings of 150-200 people, the barn offers about 2,000 square feet of porches, providing ample space to move around, find respite, and take in the serene surroundings.
The nearby pond is nestled among gentle rolling hills, a rarity in this typically flat region. They designed the venue to be more wide than tall so as not to disrupt the landscape that inspired its creation.
Bella Terra stands out from other venues in its appearance, as well. The building eschews the typical red or white color tones for a subtle gray replicated from a barn the Scanos had seen in Vermont that was clad in rough-sawn pine and stained.
The path to achieving the look wasn’t initially easy: They originally used wood siding with stain, but after a year the boards began cupping, warping, and coming off the building. The Scanos searched for a better solution, then set aside two months in early 2021 to re-side the entire exterior.
Jim knew they needed a more robust option, but was grappling with how to achieve the same look as the failing wood—after all, couples had booked the venue based on images and site visits, so a drastic change in appearance could be disastrous. After some research, he found TruExterior Siding from Boral Building Products, a Westlake company, and requested samples from their local rep. Jim tried some techniques and was able to match the look of the wood by spraying on medium brown paint, which mimicked the look of a stain, and then dry-brushing on gray paint.
“Because TruExterior has texture, it took to that really well,” Jim says. “You have to have the highs and lows, so it takes paint a certain way to leave some of the brown behind.”
And while the painted 10-inch Nickel Gap replicated the authentic original look, TruExterior Siding helped ensure the performance issues wouldn’t be repeated. Made with proprietary poly-ash technology, the siding resists rot, decay, and insects while ensuring long-term performance with low maintenance.
“Changing the siding and finding a new solution was such a huge stress,” Jim says. “So far, I couldn’t be more satisfied with the results.”
Jim’s attention to detail carries throughout the venue. He built the wood bar himself, as well as the chandeliers, helping to save on budget while achieving the form and function required of the vast space. Elegant, contemporary fixtures in the bathrooms, clean lines throughout, and black-framed windows balance the more traditional wood beams and knotty pine walls to achieve the ideal blend of rustic and modern sought after by Dallas brides.
The result is a true labor of love—and, as envisioned, Jim and Debra were the first to be married at Bella Terra when it opened in February 2019.
Foundry FPX Shingles combine easy installation with low maintenance and eye-catching beauty, making them an ideal cladding option for homeowners and building pros alike.
FoundryFPX Shingles replicate the charm and sophistication of cedar, with a refined grain and authentic shadow lines ideal for gables and other accent areas. FPX’s look is clean and neat for a crisp appearance.
To further enhance the look, Foundry FPX Singles come in five color palette options of more than 30 colors apiece to expertly coordinate with siding hues available from CertainTeed, Exterior Portfolio, Mastic, Royal, and Variform*. (Visit https://foundrysiding.com/foundryfpx/ to download sell sheets and color charts for each brand.)
Like other Foundry products, FPX Shingles are straightforward to install by both contractors and experienced DIYers alike. Along with traditional application instructions, installers are advised to use an offset installation method to ensure shingles have a natural randomized look without vertical lines from course to course.
The siding carries a Class 1A fire rating and a limited lifetime warranty. As with all Foundry Specialty Siding Products, the innovative PVC material offers low maintenance, ensuring homeowners can spend time enjoying their exterior, not taking care of it.
*Actual colors may vary from printed representations. The Foundry® Specialty Siding and Mid-America® color matches for alternative manufacturer colors listed here are recommendations only. Do not make color selections based on color names alone. Please look at product samples before selecting colors to avoid confusion and color mistakes. Returns cannot be made due to color variances.
Variform® is a registered trademark of Variform, Inc. Royal® is a registered trade mark of Royal Group, Inc. Mastic® is a registered trademark of Mastic Home Exteriors, Inc. CertainTeed® is a registered trademark of CertainTeed Corporation. Exterior Portfolio® is a registered trademark of Royal Building Products, Inc. The Foundry and Mid-America products shown and detailed in the brochures are products of Boral Building Products Inc. and are not affiliated with, endorsed, sponsored, or approved by Variform, Inc.; Mastic Home Exteriors, Inc.; or CertainTeed Corporation. Boral Building Products Inc., Royal Group, Inc., and Royal Building Products are subsidiaries of Westlake Chemical Corporation
It’s likely of little surprise to anyone that the latest American Institute of Architects’ Home Design Trends Survey reveals that two of the most popular features for today’s homeowners, by a large margin, are outdoor living spaces and home offices.
In its recently released Q3 2020 Home Design Trends study, the AIA reported that within the “special function rooms/areas” category, outdoor living not only led the way, but grew since last year, with 70% of architects reporting increasing interest compared to 61% the year before. Very close behind were home offices, with 69% of architects indicating increasing interest, which was 1 percentage point higher than 2020.
These two features far outpaced other options on the list, including “multiple offices/zoom room/space for virtual meetings” (48%), flex space (46%), and an au pair/in-law suite (42%).
Elsewhere in the survey, “low maintenance” led the Products category, with 54% of architects indicating increasing interest, down 2 percentage points from last year. (Seeking to capitalize on this trend? Check out our TruExterior Siding & Trim, which offers the authentic look of wood without the moisture and maintenance concerns.) This was followed by smart thermostats (52%) and synthetic materials (48%). Farther down the list, infrared heaters, a hot item for those looking to extend the livability of outdoor living spaces into colder months due to the pandemic, saw a big jump from 10% in 2020 to 37% in 2021.
Under technology, the survey saw a surge in interest in several categories: electric car docking stations, which jumped from 62% in 2020 to 74% in 2021; technology-friendly systems, which increased from 53% to 62%; back-up power generation, which soared from 46% to 60%; and solar panels, which saw the most dramatic change, from 37% in 2020 to 54% in 2021.
Visit the Q3 AIA Home Design Trends Survey to see all of the results, previous survey categories from this year, and an archive of past surveys.
Siding, trim, and accessories are designed primarily for the home exterior, but the properties that make some materials ideal for those traditional uses can sometimes carry over to benefit the inside of the house.
Consider these applications in which exterior materials can bring aesthetic or performance value on the inside of the home.
Fireplaces
The beauty of a stone fireplace never falls out of favor, but installation challenges make it a prohibitive option for some projects. Panelized stone offers an easier path to creating eye-catching fireplace surrounds, combining the look and feel of stone with easy installation to deliver the dramatic look of a stone fireplace within reach.
For example, Versetta Stone panels install quickly without mortar and require no special tools. Each panel can be cut with a diamond blade and fastens to the wall with screws through the integrated nailing fin. As such, it does not require a mason for installation and can be installed by traditional siding contractors and carpenters.
The Northmade Farmhouse, shown below, features a soaring two-story fireplace made with Versetta Stone Ledgestone in the Mission Point colorway, perfect for the new home’s modern-farmhouse vibe.
Because the panelized stone eliminates the messiest parts of masonry installation—with no lath, no scratch coat, and no mortar—they’re particularly helpful for remodeling projects. Cut the panels outside and pass them through the window.
And while stone fireplace surrounds require an artisan’s touch to lay out the stones so they look perfect and fit well together, panelized stone comes pre-configured in beautiful, authentic patterns. Corner pieces also make it easy to create a clean, finished look.
Accents
Panelized stone can provide a lightweight solution for rustic accent walls. Use the panels under or behind a home bar, add a cozy feel behind a freestanding tub, or create an eye-catching accent wall in the great room.
Bathroom Trim and Moulding
For wet areas such as the bathroom, cellular PVC trim provides a moisture-resistant option that will help avoid the potential for cracking, chipping, or even rot. Along with crown moulding, PVC beadboard, such as that from Kleer Lumber, is ideal for creating clean, crisp wainscoting. The material also resists dirt and is easy to wipe clean if needed.
Décor & Accessories
Even shutters can play a role in sprucing up the interior. A custom color such as that from Atlantic Premium Shutters or a reclaimed vintage piece can create a unique artpiece or be used to craft a one-of-a-kind mail holder.
Shutters are an easy way to add a bit of flair to a new or existing home, and in many cases are the key finishing touch to the perfect exterior. But it’s important to make thoughtful shutter selection choices and install them properly to ensure they look and function as designed.
Here are a few strategies to help ensure you select the right profiles and install them in a way that preserves exterior aesthetics.
Select the right shutter style
For shutter selection, it’s important to choose a style that marries well with your overall home design, otherwise the shutters will stand out for all the wrong reasons and can throw off the entire vibe of the façade. For example, a Southern Colonial home calls for louvered shutters, while Cape Cod-style homes often feature raised panel, louvered, and board-and-batten shutters. No matter how much your customer likes Bahama shutters, they’re not going to look right on a ranch home. (See more style combinations here.)
Select the right shutter shape and size
Shutters should be the same shape as the window they are covering so as to properly cover the window when closed (even if the shutters are fixed). Therefore, arched shutters should be used on round-top windows only. The arch should match the curvature of the window for the most accurate look.
The same goes for size: Shutters used in pairs should be measured properly so they fit inside the casing when closed. Even if the shutters are fixed, the eye will notice the difference.
Place shutters correctly
Another common installation mistake is extending the shutter to land directly on the window frame. Shutters are actually designed to hang on the inside edge of the window casing or frame next to the sash. This helps ensure a tight fit when shutters are closed to protect the window.
Account for thickness
For operable shutters, the thickness of the shutter must be considered when choosing hardware to ensure the shutter closes properly. Consult with your dealer or manufacturer rep to help calculate the thickness of the shutter in relation to the pintel and the hinge. Bring pictures of the exterior so they can account for brickmold and window trim.
Choose the right hardware
Because shutters sit differently on different types of cladding, take siding material and style into consideration when selecting hardware. Brick homes, for example, will require hardware attachment to the brickmold in many cases to ensure the shutter can close into the window recess and lay outside the brick when open. Hardware also is available to accommodate lap siding and trim board, among other styles and materials. (Learn more about choosing shutter hardware here.)
Don’t install shutters flat against the exterior
Historically, shutters are not installed flat against the exterior; they lay back at a slight angle so they can easily swing open and close tightly together to cover the window. However, many people using shutters purely for decorative function make the mistake of installing shutters flat against the exterior. To uphold the original functional design, space shutters off of the home’s exterior using operable hardware.
With an extensive range of styles and unparalleled craftsmanship, it’s easy to elevate the home exterior with Atlantic Premium Shutters. Consider these shutter selection strategies to make the most out of your choices and provide an instant boost in curb appeal.
From low maintenance to stylish looks to endless versatility, Foundry siding provides a go-to option for builders and remodelers seeking to boost their homes’ curb appeal.
Whether a Modern Farmhouse design or creating accents on a gable, board-and-batten is one of the hottest trends in home exterior design. And it’s easy to create the board-and-batten look using just TruExterior Trim. Not only does TruExterior’s poly-ash formula deliver the ideal combination of authentic looks and high performance, TruExterior installs with ease and can be painted any color.
Here’s how to create the coveted board-and-batten look using TruExterior Trim:
• Due to the vertical installation, be sure to use a drainable housewrap between the siding and the wood sheathing to ensure moisture has a pathway to escape the wall cavity.
• Choose 1X, 5/8”, or 5/4” trim thickness. Which one is simply a preference for the homeowner and installer
• For a traditional board-and-batten look, use 1×12 trimboard as the board and 1×3 trimboard as the batten.
• Find center on the wall and plan your layout to determine if it’s best to start with a batten or a board at that center point; you want to avoid having only a sliver of board when you reach the outer edges.
• Once you’ve chosen center board or center batten, start by installing a board first. If it’s a center board, mark the center of the wall, line up the board, and put it in place using 6D or 8D stainless steel or hot-dipped ring shank nails every 16” (and no less than 3/4” from the board edge) directly into the plywood or OSB.
• Install boards, moving away from center, leaving 3/4” of space between each board.
• After several boards are in place, chalk a single line 7/8” from the edge of the board left or right, which will designate the edge for the batten. This results in a 9-1/2” reveal between each batten.
• Apply a bead of caulk along each side of the batten or under each side of the batten.
• Install the battens using 6D or 8D stainless steel or hot-dipped nails every 16”.
• Repeat the process, moving outward from center.
Keep in mind that paying attention to your layout, and planning it out ahead of time, is important, particularly for small areas like gables. You want the surface to be as symmetrical as possible; if you have uneven board reveals on either side, it will be very noticeable, particularly on smaller surface areas.
Learn more about TruExterior Trim and how to create custom looks here.
The supply challenges that continue to impact certain building materials dealt another blow to architects and building pros in the Pacific Northwest and Mountain region with the recent announcement that a major fiber cement manufacturer will no longer be selling trim there. But those drawn to the performance and appearance of fiber cement need not worry—TruExterior Trim from Boral Building Products is readily available, offers a similar aesthetic, and provides a number of performance improvements over fiber cement trim.
Making the switch to TruExterior Trim is easy and can ensure your exterior projects don’t experience delays or require significant design changes.
Moisture Resistance
TruExterior trim is made with poly-ash, a proprietary blend of fly ash and polymers. The resulting material offers high resistance to moisture absorption, a tremendous benefit in the notoriously damp Pacific Northwest region. These same attributes allow TruExterior to be used in contact with the ground and masonry, something fiber cement cannot do, and there’s no need to prime end cuts in the field.
Like fiber cement trim, TruExterior is resistant to rot and termites.
Authentic Looks
Architects can make the switch from fiber cement trim to TruExterior without changing their design goals. The poly-ash material offers the look of wood, with options for a smooth or wood-grain surface. Minimal material movement allows for tighter gaps for a more seamless appearance.
With a high level of dimensional stability, TruExterior Trim can be painted any color, including dark hues such as black, popular for trim, or the blues and grays common in the Northwest. Paint lasts longer than it does on wood because TruExterior cycles virtually no moisture.
Superior Workability
TruExterior requires no custom tools for cutting, and the poly-ash trim can be milled similarly to wood to achieve nearly any look or custom design. (See the trim at work at DURATION MOULDING & MILLWORK.) But unlike wood, installers can fasten TruExterior close to the edge, do not have to worry about mushrooming, and do not need to pre-drill.
“Fiber cement is well-known to many specifiers and installers; however, once they work with TruExterior, they soon realize how easy it is to work with and the benefits of utilizing standard woodworking tools,” says Ben Drury, Brand Manager for Boral Building Products. “Not having to worry about moisture absorption in the boards is also a key component. You can place this product right at grade or on top of existing masonry and not experience any wicking or degradation of the board over time.”
Love the look of stone for your projects but looking for a more modern aesthetic? Carved Block combines the mortar-free installation benefits of Versetta Stone with a split-stone look perfect for contemporary and commercial designs.
Like all Versetta Stone profiles, Carved Block offers a panelized format that installs easily with screws or nails, suitable for traditional siding contractors or carpenters; no metal lath or scratch coat needed.
Carved Block comes in two colors: Midnight, featuring gray, black, and subtle tones of brown for darker applications, and Sea Salt, with lighter tones of taupe and white for the crisp appearance of split block stone.
Here are a few projects featuring Carved Block’s contemporary stone look to spark the imagination:
Carved Block in Sea Salt lends a contemporary edge to this traditional home, perfectly complementing the brick and large windows and shutters.
Carved Block in Midnight provides an eye-catching accent for this home’s entryway while complementing the modern feel of the large, crisp cladding panels.
With the look of chiseled stone, Carved Block offers an ideal alternative to traditional concrete blocks for commercial applications, with fast, easy installation.
As seen in this commercial project, Versetta Stone in Carved Block installs anywhere without the need for additional footings for support.
As the building industry navigated the COVID-19 pandemic over the past 18 months, siding, like many categories, weathered the ups and downs—from uncertainties at the beginning to booming demand a short time later to the subsequent ebb and flow of supply challenges. The continued story is the strength of the new construction and remodeling markets, with particular focus on homeowners revamping exteriors and other areas of their homes.
But even in a year unlike any other, the trends we’ve witnessed and the core demands of building pros and their customers has, in many ways, also held steady, with familiar trends remaining at or near the forefront. LBM Journal explored what’s new, and what’s not, in its annual In Depth feature on siding, published this month.
Here are a few of the things they found:
Pandemic Increases Demand
As stuck-at-home homeowners refreshed their spaces, siding surged. “Many homeowners spent quarantine finally tackling their to-do lists, and the exterior was a great place to start,” Boral Building Products’ Brand Manager Ben Drury told the magazine. “We saw an increase in interest from DIYers, particularly in simple exterior projects that make a big impact, such as replacing aging siding, adding gable vents or decorative mounting blocks, or installing decorative trim.”
The magazine says the combination of a robust housing market and low interest rates is creating a positive outlook for siding in the coming months, too.
Supply Challenges
Continued success, of course, relies on manufacturers’ ability to meet the current challenges of supply and demand, said writer Mike Berger. One manufacturer noted that the industry could be taking 20% to 30% more orders daily if not for material and labor shortages.
Above all else, manufacturers said, keeping inventory stocked will be a critical factor and, alongside that, clear communication with customers is essential. “What we’re experiencing is unprecedented demand coupled with a 10-year undersupplied market,” manufacturer RoyOMartin noted. “Builders need to pre-order what they can; those who wait for prices to come down have lost contracts.”
Classic Looks
Perhaps in conjunction with creating homes that are sanctuary spaces of respite, manufacturers report that clean lines and authentic details are still very much in demand. Within this, Modern Farmhouse and Craftsman looks continue to thrive, Berger noted. “Vertical and board-and-batten siding are quite popular right now,” Boral’s Drury explained in the article, with other manufacturers noting similar trends. “These installation approaches are an easy way to add dimension and visual interest to the home exterior. Vertical applications also can help elevate gables and other accent areas.”
Modern Farmhouse looks, such as this one featuring TruExterior Siding, continue to be popular.
Low Maintenance Rules
Low-maintenance has become so trendy it hardly bears being called a trend anymore, with “manufacturers report[ing] it as one of the single biggest differentiators when it comes to purchase decisions,” LBM Journal noted.
Products that mimic wood but without the associated upkeep continue to attract attention from older and younger buyers alike, neither of whom want to spend their summer weekends painting and staining but still cherish a natural, authentic aesthetic. (Try TruExterior Siding, made with a proprietary poly-ash material to combine authentic looks with high performance, or Foundry’s Grayne Shingle Siding, which perfectly replicates the look of cedar.)
Foundry Grayne shingle siding and Versetta Stone combine for authentic looks and low maintenance.
The Supply Channel Is Adapting
Even before the social distancing brought by the pandemic, the industry was facing pressure to be more innovative and more willing to switch to technology-based inventory and purchasing solutions. “For years, physical displays have been a mainstay of product information and a key method for conveying how a product will look once installed,” Berger wrote. “But that was then—this is now. In addition to the tried and true, the successful LBM dealer will avail themselves of virtual tools to help impart product knowledge.”
Berger pointed to virtual design tools that show customers how products will look on their homes (such as the Virtual Remodeler tool) as one method. But even as technology infiltrates the buying process, nothing negates the need for dealers to understand the products they sell and the value they bring to customers in helping find the ideal solution for each project.
The appearance of shutters and their impact on the home’s aesthetics not only depends on the style and color, but also how they’re installed and what type of hardware is chosen. Hardware is a small detail—but one that can have a dramatic influence on the home’s authenticity.
Here are a few strategies to keep in mind when choosing hardware for shutters.
• Seek guidance: Choosing the right hardware for custom shutters requires some basic expertise—and even a bit of math. When in doubt, talk to an experienced dealer or the manufacturer’s representative. They can provide advice on the proper hinge and pintel offsets for your shutters and the home to ensure you get the look you’re striving for.
• Consider the home’s age: If the home is older or the style is vintage, select hardware that contributes to an authentic look. For example, a slide bolt can help keep shutters closed while adding an old-timey appearance. Visible S holdbacks and rat-tail holdbacks also add a historic vibe. In addition, older homes typically have shutters that sit back at an angle in the open position, whereas shutters for today’s homes tend to lie flat, so consider how different offsets of the hinge and the pintel will impact the way the shutter sits.
• Take cladding into account: Shutters will sit differently on different types of cladding, both in material and style, because it impacts how the window is installed. Brick homes, for example, will require hardware attachment to the brickmold and allow the shutter to close into the recess of the window and when open to lay outside on the brick. Hardware also is available to accommodate lap siding and trim board, among other styles and materials.
• Account for shutter thickness: The thickness of the shutter will impact which offsets are needed for proper operation. The thickness must be considered when choosing hardware to ensure the shutter closes properly. Your dealer can assist with calculating the thickness of the shutter in relation to the pintel and the hinge. Bring pictures of the exterior so they can account for brickmold and window trim.
• Consider visibility: Determine if you want visible hardware from the front or back. For front-exposed hardware, for example, a strap hinge will look more appealing than an L hinge, especially if the shutter has three hinges; if exposed to the rear, hinge style is less important.
• Consider adding acorn holdbacks: For tall shutters (such as those 5 feet and above), decorative holdbacks, such as an S holdback, sit low on the shutter and do not hold the top of the shutter. This one holdback may not be strong enough to prevent vibration in wind. Adding acorn holdbacks behind the shutter can help anchor the shutter to prevent movement and potential scratching while retaining the look of the S holdback on the front.
• Conduct occasional maintenance: Made of 304 stainless steel, Atlantic shutter hardware doesn’t need much maintenance, but can be cleaned of pollen and dust when necessary. Clean with mild soapy water and a soft cloth, not with a heavy bristle brush.
Get inspired to achieve the perfect look by browsing Atlantic Premium Shutters’ hardware options here.
Each May, some of the industry’s supply channel-focused publications release annual reports, listing the industry’s leading LBM dealers and distributors as well as the economic trends that have shaped their businesses the previous year.
This year saw the release of two new lists—the LBM Journal 100 and the Construction Supply 150 from Webb Analytics—which were published in May following one of the most unprecedented years in construction history. From the uncertainties at the onset of the pandemic to the housing and remodeling boom that soon followed to the supply and pricing challenges going on now, the building supply industry has been challenged in ways most had never seen before. And many dealers navigated extremely successfully.
Here are a few observations from LBM Journal and Webb Analytics for how dealers and distributors weathered 2020 and what trends are shaping up in 2021.
• Acquisitions continued: LBM dealers continued to scoop each other up. The most high-profile was Builders FirstSource purchasing BMC, growing from 440 locations to 550 locations in the process. But the moves weren’t limited to the big players, with dealers of all sizes taking advantage of opportunities to expand in size and geography via acquisition.
• Retail sales big, commercial suffers: With the surge in home improvement and DIY projects, it’s not surprising that home centers and dealers with heavy percentages of retail customers posted some of the biggest growth last year, as reported by the Construction Supply 150. Unfortunately, companies selling commercial-heavy inventories, such as steel studs and ceiling systems, saw declines. “It’s pretty clear that homebuilding will remain strong, and surveys suggest big-ticket remodeling will rebound as homeowners become less fearful of having remodelers working in their kitchens and baths,” Craig Webb wrote in the CS150.
In looking ahead to this year, a majority of CS150 respondents believe new construction and remodeling will continue to grow, but most expect retail sales, as well as multifamily and commercial, to remain the same.
• Labor remains a challenge: 77% of the LBM Journal 100 reported challenges with recruiting, hiring, and retaining employees, with drivers and yard workers the hardest-to-fill positions.
• The power of relationships: LBM dealers have always touted the importance of employees and customer relationships, but the pandemic drove that home even more. “The silver lining of the pandemic for us has definitely been relationships,” Charlie Parks, co-owner and vice president of Parks Lumber & Building Supply told LBM Journal. “We have developed stronger relationships with our customers, suppliers, and even with other supply houses in the area that we have done some dealing back and forth with during the shortage.”
• Installed sales: More than half of the Construction Supply 150 conduct installed sales. The most popular product categories include entry doors, cabinets, countertops, interior doors, and bathroom vanities.
• E-commerce expanding…slowly: The construction industry is notorious for slow adoption of technology, but the pandemic helped speed things along. LBM Journal found that while only 33% of leading dealers are offering online sales, 78% said online sales were significantly or slightly higher than the year before. As Webb noted in the Construction Supply 150, “true online shopping is unlikely to become ubiquitous until dealers figure out how to automatically adjust a price based on the customer.”
The beauty of a stone fireplace never falls out of favor, but installation challenges make it a prohibitive option for some projects. Versetta Stone panelized stone offers an easier path to creating eye-catching fireplace surrounds, combining the look and feel of stone with easy, panelized installation to deliver the dramatic look of a stone fireplace within reach.
One of our favorite examples is the Northmade Farmhouse, which features a soaring two-story fireplace made with Versetta Stone Ledgestone in the Mission Point colorway, perfect for the home’s modern-farmhouse vibe. (Read more about this project here.)
Versetta Stone offers a range of benefits for fireplace surrounds:
• Easy, straightforward installation: Versetta Stone panels install quickly and require no special tools. Each panel can be cut with a diamond blade and fastens to the wall with screws through the integrated nailing fin. As such, it does not require a mason for installation and can be installed by traditional siding contractors and carpenters. It’s also within reach of advanced DIYers.
• No artistry required: Stone fireplace surrounds require an artisan’s touch—laying out the stones so they look perfect and fit well together and then replicating that layout on the wall. With Versetta Stone, those steps are taken care of. Simply fasten the panels to the wall, and the pattern looks beautiful without much creativity. And yet it still has the look of hand-crafted stone. Corner pieces also make it easy to create a clean, finished look.
Versetta Stone fireplace surrounds offer a tremendous array of design possibilities, such as this two-sided column fireplace shown here, made with Ledgestone in Sand.
• Less mess: Versetta Stone eliminates the messiest parts of masonry installation—no lath, no scratch coat, no mortar. This is especially helpful for remodeling projects, eliminating concerns about tracking in mud or ruining manicured lawns washing off tools and mud buckets. Versetta Stone panels require cutting that generates dust, but this can be done outside over a tarp, with cut pieces handed in through the window.
• Lightweight: Versetta Stone weighs 17 pounds per panel, or 8.5 pounds per square foot.
Versetta Stone makes outdoor fireplaces easier too. Switala-Berner Construction crafted this two-sided unit with Ledgestone in Mission Point.
• Suitable for fireplaces: Versetta Stone is safe for use as a fireplace surround for gas and electric fireplaces and does not require distance from the firebox like some non-combustible materials do. (However, it cannot be used inside the firebox.) Still, installers should always follow fireplace manufacturer instructions and guidelines for surround materials.
This bold fireplace was made with Versetta Stone Ledgestone in Plum Creek.
Find more Versetta Stone design inspiration for interiors in our Idea Gallery.
Outdoor living spaces are one of the biggest trends in home building and remodeling, and demand has only grown during the pandemic.
As the demand for outdoor living moves from growing trend to must-have status, simply adding on an ordinary deck isn’t going to be enough. Building pros can elevate outdoor spaces in numerous ways, and they don’t have to break the bank.
Here are a few simple and relatively inexpensive details to consider to add the finishing touch to your outdoor living spaces and take them to the next level.
Create Indoor-Outdoor Connections
Not every home can have an eight-panel opening glass wall, but that doesn’t mean you can’t create those connections that let in more light and expand the entertaining space.
As Andersen Windows points out in a recent article, the standard French patio doors with sidelight windows can easily be replaced by a small multi-panel door with one or two sliding panels, helping to expand the clear opening to preserve views and create that desired indoor-outdoor connection.
Another more budget-friendly option is to include pass-through windows to create an indoor-outdoor bar, such as this project by Denny Sturgis Construction.
Detail the Deck
No matter the size of the deck, there are a few simple strategies to make it look more finished and polished.
• Rather than leaving deck planks exposed, add fascia board around the perimeter to create a more finished look. TruExterior poly-ash trim can be painted or stained any color and can be used in contact with decking material.
• For composite decks, hidden fasteners cost a little more but make a big difference in the look and feel of the deck. For grooved-edge boards, clip-style hardware stays completely hidden; for face-fastening, a plug system is the most hidden option, or, at minimum, choose color-matched screws.
• Add flair to composite decks with inlays and picture framing. These techniques can be used to add a decorative perimeter, break up long expanses, or create an outline around different areas, such as a sitting area or outdoor kitchen.
• Don’t neglect lighting, which can add ambience, make the space safer, and extend its use later into the night and farther into colder months. Integrated post cap, railing, or stair lights can be easy and economical to add on or integrate.
• Add an accent wall or elevate the grill area with stone, such as panelized stone siding from Versetta Stone.
Ledgestone Mission Point
Amp up your outdoor buildings
A beautiful backyard can be the perfect spot for a studio, she shed, or ADU. But make sure it’s got style. A rickety wood shed or wobbly plastic structure can bring down the aesthetic of the whole outdoor space. Use real siding and trim, include accessories, and add landscaping.
This beautiful tiny house ADU by Koncept Design/Build, for example, looks just as good as a main house, with beautiful craftsmanship, on-trend black-framed windows and doors, and meticulous trimwork using TruExterior poly-ash trim
This garage/man cave by Adam Hass Fine Homebuilding also could pass for a main living space, with its traditional forms and well-thought-out details.
Even a storage shed can look a bit more refined, as seen with this example from Zuccon Works, which features richly colored siding and Kleer cellular PVC trim and window casings.
Don’t Neglect the Accessories
It’s easy to leave the aftermarket accessories up to the homeowner, but why not complete the look or at least show them how?
For example, this flower box made with Kleer Lumber PVC trim not only offers a cleaner, more stylish look than run-of-the-mill planters, it’s durable and can be used in contact with the ground without moisture concerns.
Kleer is also a fun choice for these Adirondack chairs. The teal offers a fun pop of color to the porch without too much commitment or concern over resale value.
And don’t forget to finish the porch. Here, installers used TruExterior Beadboard in a soft robin’s egg blue to add to the vintage vibe of this wide porch.
Post wraps, such as these from Kleer, are a simple way to enhance the porch or deck without adding extra maintenance needs.
Replacement shutters are one of the easiest ways to give the home exterior an instant facelift. Simple changes in shutter color or style can transform the façade with minimal work—it’s a small investment that can net a big payoff.
“For the cost and labor, shutters should come to mind more often for home improvement projects,” says Matt Bjorkstrom, Associate Merchant for Lowe’s, which exclusively distributes Vantage shutters. “When you change out the shutters, it really makes a difference to the façade.”
Here are a few things to keep in mind as you choose new replacement shutters for the home:
• Consider size: When choosing new shutters, sizing is just as important as color and style. Even though most shutters today are solely decorative, they’re meant to mimic real, operable units. So when choosing a size, ensure the new shutters “appear” that they would close properly over the window. Otherwise, they’ll look inauthentic.
In addition, make sure the replacement shutters are the same size as or larger than your current shutters.
• Choose replacement shutter styles that complement your home exterior: Certain shutter styles go better with some materials versus others. For example, panel-style shutters are ideal for brick or fiber cement facades, while louvered shutters go well with vinyl siding, traditional homes, or coastal homes. Board-and-batten is well-suited to Craftsman exteriors or more contemporary looks.
Also keep your neighborhood in mind: Are there HOA requirements or restrictions? What styles will be complementary to (though not necessarily match) neighboring homes?
And be sure to use the same style shutter throughout the exterior; mixing styles on the same home will look off. The same goes for shutter colors.
Vantage open louver shutters are the perfect complement to this traditional-style home.
• Seize the color opportunity: Because shutters are an easy, relatively affordable way to refresh your exterior, it gives you more freedom to experiment and be bold. Black shutters will always look great, but why not try out new, eye-catching color combinations, Bjorkstrom suggests, such as teal shutters on gray siding?
The front door is another place to experiment with bolder colors, so consider matching the entry door and the shutters to create pops of color and really set the home apart from others.
Blue Vantage shutters with matching entry door differentiate this brick Colonial-style home while still feeling authentic.
• Seek out inspiration: Shutters are a component that make a façade feel complete yet don’t stick out. Look to sites like Pinterest and Houzz for shutter inspiration—what adds to a home versus distracts? What color combinations pop without looking garish? Also, be check out Vantage’s idea gallery for more ideas.
